Shifter box

Looking for a Lever push rod part #108824 and spring, this part is missing in my shifter box and probably why my gearbox feels hard to shift. Any one know where to source one or know the dimensions so I can make one, I was able to source one for the right hand drive car #103317?? but not for the left hand drive, so also if some one know the difference between them.
Image Unavailable, Please Login

 

There is a complete gear shift assembly on ebay for sale at the moment, very pricey though £1000 plus postage if your very very desperate, sorry if link doesn't work, just put in search bar and you'll find it, I have nothing to do with the sale myself, good hunting
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F173504354278

 

Thanks, a little price for just the push rod, I’m thinking I just measure the hole in winter and make one my self if I don’t find one before, unfortunately they don’t sell them at Ferrari anymore.

 

At that price, I would just buy a micro-mill and do it. Not a high tech piece, you need the measurement of the hole where it goes in, and the other side where the spring goes in.

 

I made a drawing before I sold the last one I had. Please contact me per mail if I shall get one made. [email protected]
Best regards,
Stefan

 

Just to let you know if someone else having this problem, the part #108824 is the exact same part as #103317 except for the little stud in the middle, just grind it off and you have part #108824 [emoji3]. For some reason #103317 is easier to find. Mine had rusted stuck and had to be changed.

 

Isn't the little stud important??

 

For some reason it is not important on LHD cars, you don’t even have the opposite guide hole in gear stick. But on RHD cars you have the guide pin and opposite hole in the stick, no idea why.