Steering noise | FerrariChat

Steering noise

Discussion in '308/328' started by dinonz308, Oct 3, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dinonz308

    dinonz308 Formula Junior

    Joined:
    Nov 26, 2017
    Messages:
    869
    Full Name:
    Dean
    Just today I started hearing a scraping noise from behind the boss/hub on the steering wheel. I cannot see anything, but is it relatively safe to take the wheel and hub off to look? Never done it before, and can't find any DIY instructions on the web, but looks like the 3 hex screws to get the wheel off, then 2 bolts holding the boss/hub on? Anything I should be worried about falling out and never seeing again?

    The noise is quite significant (not faint) and I'm worried about it being a loose screw that could jam the steering.
     
    dinonz308, Oct 3, 2019
    #1
  2. thorn

    thorn F1 Rookie Silver Subscribed

    Joined:
    Aug 7, 2012
    Messages:
    3,324
    Location:
    Tallahassee, FL
    Mind the delicate wiring for the horn button.
     
    thorn, Oct 3, 2019
    #2
  3. dinonz308

    dinonz308 Formula Junior

    Joined:
    Nov 26, 2017
    Messages:
    869
    Full Name:
    Dean
    Will do - thanks!
     
    dinonz308, Oct 3, 2019
    #3
  4. miketuason

    miketuason F1 World Champ Owner Silver Subscribed

    Joined:
    Feb 24, 2006
    Messages:
    15,833
    Location:
    Cerritos, CA.
    Full Name:
    Mike
    You will need the special socket to remove big nut for the steering wheel hub.
    I had to make one out of an old socket.
     
    miketuason, Oct 3, 2019
    #4
  5. dinonz308

    dinonz308 Formula Junior

    Joined:
    Nov 26, 2017
    Messages:
    869
    Full Name:
    Dean
    And now we're getting to the gold. Easier to take it to Brian?
     
    dinonz308, Oct 3, 2019
    #5

Share This Page