The Longster | FerrariChat

The Longster

Discussion in 'Aviation Chat' started by donv, Feb 22, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. donv

    donv Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Jan 5, 2002
    Messages:
    26,119
    Location:
    Portland, Oregon
    Full Name:
    Don
    A friend of mine who is kind of the historian for the Beaverton and Hillsboro Oregon area airports, posted an article on facebook that he found about one of the first homebuilt aircraft, the Longster. I had to take a second look at the byline, because it was our own Bob Parks!

    The illustration is beautiful as well... from American Modeler in 1969.


    Image Unavailable, Please Login
     
    donv, Feb 22, 2019
    #1
  2. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,175
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Bob certainly gets around. Model magazines often got scoops. For years, the best info on the U-2A was an article in Model Airplane News from the early 60s.
     
    tazandjan, Feb 22, 2019
    #2
  3. Bob Parks

    Bob Parks F1 Veteran Consultant

    Joined:
    Nov 29, 2003
    Messages:
    8,017
    Location:
    Shoreline,Washington
    Full Name:
    Robert Parks
    Don, I thought that the detailed inboard profile would be posted also, a very interesting building process used by Les Long. I believe that there is one of these Henderson powered Longsters somewhere in Oregon. BTW, that illustration was done by a magazine artist, I did the structural drawing that went with the article.
     
    Bob Parks, Feb 22, 2019
    #3
  4. donv

    donv Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Jan 5, 2002
    Messages:
    26,119
    Location:
    Portland, Oregon
    Full Name:
    Don
    donv, Feb 22, 2019
    #4
  5. Bob Parks

    Bob Parks F1 Veteran Consultant

    Joined:
    Nov 29, 2003
    Messages:
    8,017
    Location:
    Shoreline,Washington
    Full Name:
    Robert Parks
    Thanks, that's it. I always thought that this was an interesting example of American ingenuity, using an air cooled motor cycle engine of low horse power and made it work in a well designed airframe by a guy that wasn't an engineer. The joints in the fuselage frame tubing were brazed and then had sheet metal gussets pinned to the tubing joint with small 6 or 8 penny nails and then also brazed. There was never a failure reported.
     
    Bob Parks, Feb 22, 2019
    #5

Share This Page