Window motor

Looks like either my window motor has failed or bad switch but stuck in down position. Its a 1980 400i. Manual shows a crank and access hole in door panel if this issue arises. I do not have tool kit so no crank. Any suggestions? Other tool that might work or where I could possibly find this crank?
Any help appreciated.

 

I have one...it was in the glove box, I tried it on my left window, which is stuck "up", but afraid to crank too hard, it is plastic. I can send a pic tonight when I get home so you know what it looks like, if it might be hiding somewhere. I am 3 hours east of you in Port St. Lucie, I could mail it to you if you want to try it, just don't break it !
You will probably need to pull the door panel and fix it, there are several threads under the subject "window" with a lot of good info, do a search before you teardown.

Good luck...let me know....Gary

 

Thanks, photo would at least give me an idea.

 

Here's someone who reproduces them for the earlier cars, his ad was on Ferrari Club of America's site, maybe he could steer you in the right direction if he can't do it.

For 275 GTS, 330 GTC/GTS, 365 GTS, late 1960 cars: Emergency window crank used to open/close door widows when power widow fails. Concours checklist item. Reproductions using original factory pattern. $95 + shipping. Clete (727)735-1447, e-mail: [email protected] (FL).

Also, Verell here on Fchat make reproductions of parts that are NLA. You could try to PM him about it as well. Here's a thread he started a while back:

http://www.ferrarichat.com/forum/technical-q/217637-unobtainium-supplies-k-jetronic-fuel-injecter-puller-installer-tool.html

 

Here are some pictures....just my phone ....
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Wow, that flimsy looking and so complicated., I should have known.

 

I would check the switch first.

 

Plugs directly cables electric window on the battery you will see if it works