Lobo bolts | Page 2 | FerrariChat

Lobo bolts

Discussion in 'Vintage (thru 365 GTC4)' started by christc, Sep 30, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. topolino

    topolino Karting

    Jul 21, 2006
    67
    Aachen Germany
    Full Name:
    Hein Brand
    M8x1,0mm with 14mm head were used on the propshaft of all Giulietta 750-101 and early 105 series until 1967
    M8x1,0mm with 12mm wrench size were used on the intake manifold / carbs on all twin carb AlfaRomeo with DCOE Webers on 750-101-105series

    Regards
    Hein Brand
     
    turbo-joe likes this.
  2. Ics19

    Ics19 Rookie

    Sep 8, 2019
    6
    UK
    Full Name:
    Richard
    Apologies for resurrecting an old thread - would I be correct in thinking that when you see "80" and "10.R" (or even "R10") on FIAT / LOBO marked heads (such in TTR's head collection picture) that they correspond to the respective ISO 8.8 and 10.9 classes ? Does the "R" represent the coating/finish type?
     
  3. TTR

    TTR F1 Veteran
    Rossa Subscribed

    Mar 29, 2007
    5,141
    Riverside, CA
    Full Name:
    Timo
    #28 TTR, Oct 24, 2021
    Last edited: Oct 24, 2021
    I don't have definitive answers to either, but your first assumption, i.e. "thinking", seems logical.
    The "R" might also refer to some other (than "coating/finish") technical spec.
     

Share This Page