electrolux autoliv part # 13 20 42 00 | FerrariChat
Buy

electrolux autoliv part # 13 20 42 00

Discussion in 'Mondial' started by russlv, Oct 20, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. russlv

    russlv Karting

    Feb 29, 2012
    63
    las vegas, nv,
    Full Name:
    Russ Lorenzen
    #1 russlv, Oct 20, 2012
    I am replacing the carpet in my '91 MondialT and under the drivers side panel just adjacent to the gas pedel, and where the stainless wear protector for the gas pedel is placed; I discovered a black box somewhat strangley mounted behind it. The box says Electrolux Autoliv with a manufacture date of 9048 and a part # of 13 20 42 00. I disconected it and it seemed that everthing was still working (not a thorough check though). I recently had the alarm replaced and a k40 hidden radar detector installed; so I don't know if this is part of the old alarm or what. The thing that concerns me is the manufacture date which would make it seem like this was an original part installed from Ferrari. The way that it was mounted to the revese side of the foot well just seemed a little non-factor though. Any help here would be wonderful.
    Thanks,
    RussLasVegas
     
  2. PT 328

    PT 328 F1 Rookie
    Silver Subscribed

    May 1, 2005
    4,016
    #2 PT 328, Oct 20, 2012
    I believe Autoliv makes parts for safety equipment on cars like airbags, seatbelt systems, etc..

    I am sure someone will chime in with the specific answer.
     
  3. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,932
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #3 Steve Magnusson, Oct 21, 2012
    Last edited: Oct 21, 2012
    Probably the ECU for your motorized seat belts as Dan indicated (the cover for a similar publication for the TR motorized seat belts -- note the names in the upper left corner):

    Image Unavailable, Please Login

    Were your motorized seat belts previously disabled or replaced with a manual system? Not the greatest figure to show how things go together, but see if what you have looks like this:

    http://www.ricambiamerica.com/parts_catalogs.php?M=FE&P=&V=diag&I=1978
     
  4. davebdave

    davebdave Formula 3
    Owner Silver Subscribed

    Mar 18, 2007
    2,381
    Northern VA
    Full Name:
    Dave W
    #4 davebdave, Oct 22, 2012
  5. russlv

    russlv Karting

    Feb 29, 2012
    63
    las vegas, nv,
    Full Name:
    Russ Lorenzen
    #5 russlv, Oct 23, 2012
    I have the part disconnected right now, and the seat belt mice still work. Wondering if it might be for the auto seat tensioners during an accident. It is a real pain to re-install though ...
     

Share This Page