328 recalls | FerrariChat

328 recalls

Discussion in 'Technical Q&A' started by zebra308, Feb 4, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. zebra308

    zebra308 Formula 3

    Jan 14, 2004
    1,336
    All Flimmits
    Full Name:
    Ruffis Leekin
    I recently aquired a 1986 328 GTS. What would be the best way to find out if the recalls have been performed. It had 3 previous owners and the maintenance records are not complete from day one.
    Thanks!
     
  2. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,017
    Groton, MA
    Full Name:
    Verell Boaen
    Assuming it's a US Spec version, start by contacting your local Ferrari dealer. Ferrari of North America.They have a central database of service records.

    If it's an Euro model, then rotsaruck unless you can track down the POs & get them to tell you where it was serviced, & then tell the shop it's ok to give you a copy of the service records.
     
  3. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    17,913
    USA
  4. zebra308

    zebra308 Formula 3

    Jan 14, 2004
    1,336
    All Flimmits
    Full Name:
    Ruffis Leekin
  5. Ferrari_tech

    Ferrari_tech Formula 3

    Jul 28, 2003
    1,527
    UK
    Full Name:
    Malcolm W
    If it is a Euro car let me have the chassis number and I will check for you


    MW
     
  6. wimeldo

    wimeldo Formula 3

    Jul 24, 2003
    1,297
    (Spain)
    Full Name:
    Alfredo

    Hello, day ago, I bought in Ferrari UK the pieces #147829, thought that they are as the piece "A" and I have sent piece "B", your you think that it will serve?

    It is for a GTS Turbo of year 1987

    Nº27 ref. #147829 EXHAUST GASKET RING...

    plane:
     
  7. wimeldo

    wimeldo Formula 3

    Jul 24, 2003
    1,297
    (Spain)
    Full Name:
    Alfredo
    "A" and "B"
     
  8. KurtK328

    KurtK328 Formula Junior

    Mar 6, 2001
    347
    Villeneuve-Loubet, France
    Full Name:
    Kurt Kjelgaard
    Hmmm, what happened to the original post?
     
  9. wimeldo

    wimeldo Formula 3

    Jul 24, 2003
    1,297
    (Spain)
    Full Name:
    Alfredo

    Also ;)

    The piece also will have to be changed in the 328. It is the same piece. All usually have problems with exhaust system.

    Regards
     
  10. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    17,913
    USA
    Wimeldo,
    I am not fully understanding your post (language difficulties) but I think you are inquiring if part B is an acceptable substitute for part A? If so, I think NOT. You need part A the proper exhaust gasket to seal properly. Part B is too thin, and will not take up the gap or space presented after the (old) part A is removed.
     
  11. wimeldo

    wimeldo Formula 3

    Jul 24, 2003
    1,297
    (Spain)
    Full Name:
    Alfredo

    @davehanda

    Thank you very much,
    request excuses by my bad writing. Not to be written in English.
    You think correctly, that is the question.
    I believe that you are right, the piece is very thin; but why then, Ferrari UK has sent piece "B" with the correct reference.

    Regards

    Alfredo.
     

Share This Page