Help!! 348 Main Oil Pipe | FerrariChat

Help!! 348 Main Oil Pipe

Discussion in 'Technical Q&A' started by cossd, Aug 24, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. cossd

    cossd Rookie

    Joined:
    Nov 9, 2003
    Messages:
    2
    Location:
    Rugby England
    Full Name:
    Darren Coss
    Can anyone help, I am trying to find out the cost and part number for the main oil pipe on a 1991 348, the pipe that runs from the tank with the dip stick and is obviously braided. These's seem to be in short supply as I have waited nearly 5 months for the service to be completed on my car becuase of this.
     
  2. kenyon

    kenyon F1 Rookie

    Joined:
    Oct 7, 2002
    Messages:
    2,837
    Location:
    East Yorkshire
    Full Name:
    Justin Kenyon
    Try goodridge that supply the hose.
    They should have a website.
    Its a standard braided hose..
     
  3. dpsuk999

    dpsuk999 Formula Junior

    Joined:
    Feb 12, 2004
    Messages:
    264
    Location:
    Leeds UK
    Full Name:
    Dave
    Part No 141819 "Tank/delivery pump connection pipe"
     
  4. jkuk

    jkuk Formula Junior

    Joined:
    Nov 3, 2003
    Messages:
    259
    Location:
    Wirral, UK
    Full Name:
    John K
    I would expect this to be expensive - circa £750.

    Mine was leaking slightly at the connections when it had the 18K + belts done and i had the choice on new ones or use best endeavours.

    My mechanic re-connected the pipes with sealant and all has been well since.

    He also advised that if new ones were needed it was better to go to a hydraulic pipe manufacturer as they would be considerably cheaper.

    Obtaining the unions would be the delay - but weeks not months.

    Hope this helps

    John
     
  5. GOS 348

    GOS 348 Karting

    Joined:
    Jan 17, 2004
    Messages:
    108
    Location:
    Edenbridge, Kent
    Full Name:
    Chris Gosling
    Hi,

    Main oil pipe is £800 from Ferrari.

    Try Phil at QV at Ascot, 01344 622011, he had a second hand one hanging up in the stores yesterday.

    Chris
     
  6. fatbillybob

    fatbillybob Two Time F1 World Champ Consultant Owner

    Joined:
    Aug 10, 2002
    Messages:
    29,287
    Location:
    socal
    Any good hose supplier can cut and splice. In europe the fittings are all over the place ie metric. In the usa you have to do all knids of gyrations like buy from europe or hunt like hell or give up and cut the nipple off the oil tank and tig weld on a correct American AN bung then splice the hose to AN. No big deal just do what is quick and easy. 750lbs! are you kidding FNA's price on that should be illegal.
     

Share This Page