Proper torque spec for 360 wheels?... | FerrariChat
Buy

Proper torque spec for 360 wheels?...

Discussion in 'Technical Q&A' started by Gary(SF), Sep 16, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Gary(SF)

    Gary(SF) F1 Rookie

    Oct 13, 2003
    3,637
    Los Altos Hills, CA
    Full Name:
    Gary B.
    #1 Gary(SF), Sep 16, 2004
    modular, if that matters.

    Thanks,

    Gary
     
  2. chrisoutzen

    chrisoutzen Rookie

    Nov 6, 2003
    33
    sudbury
    #2 chrisoutzen, Sep 16, 2004
    I torque my wheels to 75 ft-pounds.
     
  3. Gary(SF)

    Gary(SF) F1 Rookie

    Oct 13, 2003
    3,637
    Los Altos Hills, CA
    Full Name:
    Gary B.
    #3 Gary(SF), Sep 17, 2004
    Is that the factory spec? Seems low.

    Gary
     
  4. thomas_b

    thomas_b Formula Junior

    Sep 15, 2003
    765
    #4 thomas_b, Sep 17, 2004
    you can find the numbers in the owner's manual

    pre tighten to 26-29.5lb-ft (35-40Nm)
    final tighten to 74lb-ft (100Nm)

    surprisingly the torque specs are the same for all 360 flavors, i.e. the titanium bolts for the Stradale and the aluminum lug nuts for the Challenge
     

Share This Page