Dino 246 major tune up | FerrariChat

Dino 246 major tune up

Discussion in '206/246' started by raywong, Oct 4, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. raywong

    raywong Formula Junior

    Aug 29, 2004
    667
    Hong Kong
    Full Name:
    Raymond
    After a month of waiting, the mechanic is finally available tommorow. This is the first major tune up since I got the car a month ago. Here is the thing I would like to check out:

    - oil pressure gauge is always at zero. (check pressure)
    - funny sweet smell after the engine is warm. (check for coolent leak)
    - exccesive smoke coming out one side of the exhaust. (check engine)
    - engine stalls if I go "rev, rev". (check a/f ratio)
    - tacho gauge needle gose all over the place. (no solution)
    - paints coming of the engine. (repaint?)

    can't wait to see the final bill.
     
  2. ferrarifixer

    ferrarifixer F1 Veteran
    BANNED

    Jul 22, 2003
    8,520
    Melbourne
    Full Name:
    Phil Hughes
    Get the carb float levels checked and adjusted, the distributor advance and the phasing read and checked. (if it's a 3 lobe, not necessary on 6 lobe), and of course all other proper servicing and valve clearances, and chain tensions etc etc.

    Dinos can be so nice when right, but so nasty when wrong.....
     
  3. raywong

    raywong Formula Junior

    Aug 29, 2004
    667
    Hong Kong
    Full Name:
    Raymond
    thanks! will add them on the list.
     
  4. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Ray. How about an update.

    Running better, or still in pieces in the shop??
     
  5. Sal Manzur

    Sal Manzur Formula Junior

    Sep 12, 2004
    282
    Upland Ca
    Full Name:
    Salvador Manzur
    There is an adjustment to the oil pressure by the oil filter, according to
    the owners manual.

    Do you have a dino script on your horn push button?. I am looking for a source to buy one.

    Difference between superformance and re-originals prices on wiring loom?
    why 3 times the price?
     

Share This Page