Which side of the clutch goes toward Pressure Plate on 308? | FerrariChat

Which side of the clutch goes toward Pressure Plate on 308?

Discussion in 'Technical Q&A' started by 308GTS, Oct 6, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 308GTS

    308GTS Formula 3

    Dec 27, 2001
    2,223
    TN
    #1 308GTS, Oct 6, 2004
    I am in the process of replacing my clutch on my 308 QV and I am pretty sure the raised section/side of the clutch disc hub goes toward the pressure plate/bell housing side. The other side of the clutch disc hub is flat. I just wanted to make sure I have it right. Currently, I have the rasied side facing the pp and bell housing.
     
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    33,996
    Austin TX
    Full Name:
    Brian Crall
    #2 Rifledriver, Oct 6, 2004

    You got it right.

    FYI Ferrari clutches go in different ways on different models. If in doubt place the disc against the flywheel, if the hub hits the flywheel center, it's wrong, if the friction surface hits the flywheel, it's right.
     
  3. 308GTS

    308GTS Formula 3

    Dec 27, 2001
    2,223
    TN
    #3 308GTS, Oct 6, 2004
    Thanks. I appreciate it. I just wanted to make sure.
     

Share This Page