Sources for slotted rotors for 360 | FerrariChat
Buy

Sources for slotted rotors for 360

Discussion in 'Technical Q&A' started by Gary(SF), Nov 17, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Gary(SF)

    Gary(SF) F1 Rookie

    Oct 13, 2003
    3,637
    Los Altos Hills, CA
    Full Name:
    Gary B.
    #1 Gary(SF), Nov 17, 2004
    I want to replace my OE drilled rotors with slotted, I understand they are less likely to crack in track applications. Any recommendations for suppliers? I'm aware of Girodisc, wonder if there are other solutions I should consider.

    TIA,

    Gary
     
  2. Tifoso1

    Tifoso1 F1 Rookie

    Nov 18, 2003
    2,606
    Pacific NW
    Full Name:
    Anthony C.
    #2 Tifoso1, Nov 17, 2004
    Brembo: Expensive
    StopTech: There were rumors that they may be developing brakes for Ferrari, check with them.
     
  3. dan360

    dan360 F1 Rookie

    Feb 18, 2003
    2,669
    Boston
    #3 dan360, Nov 17, 2004
    Brembo - slotted are what the challenge cars use. I think these are about 3500 if you get the two part ones. For these you can then just replace the friction part of the rotor subsequently for about 2K.
     
  4. 4i2fly

    4i2fly Formula 3

    Apr 16, 2004
    1,333
    SF, Bay Area
    #4 4i2fly, Nov 17, 2004
    Brembo slotted are about $1800/axle and that includes the alu hat. I guess once you are to replace the rotors only they are ($400/axle?). I think these are the floating rotors and I heard they make a lot of noise, similar to the challenge cars.

    Edit: I also understand they are about 8 lb lighter than stock per wheel (good for decreasing unspung weight)

    I know StopTech already has rotors for 360, but they are like a couple of mm smaller. May not be an issue since you get damn good price for them but if someone is an expert should chime in...
     
  5. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,288
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #5 Rifledriver, Nov 17, 2004
    All the Brembo floating rotors I have installed have the springs and ran quiet.
     
  6. Gary(SF)

    Gary(SF) F1 Rookie

    Oct 13, 2003
    3,637
    Los Altos Hills, CA
    Full Name:
    Gary B.
    #6 Gary(SF), Nov 17, 2004
    Just for reference, what's available in the OE-style drilled rotors?

    Gary
     
  7. maranelloman

    maranelloman Guest

    #7 maranelloman, Nov 17, 2004

    StopTech has them now for the 360, I believe.
     
  8. 348paul

    348paul Formula 3

    Dec 27, 2002
    1,098
    Kent - UK
    Full Name:
    Paul Hill
    #8 348paul, Nov 18, 2004
    Gary,

    The OE Brembo disks for the 360 over here in the UK retail for £142.96 each.

    Paul
     

Share This Page