What size TORK tool for 355 airbag wheel?? | FerrariChat

What size TORK tool for 355 airbag wheel??

Discussion in 'Technical Q&A' started by chaa, Nov 18, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chaa

    chaa F1 Veteran

    Mar 21, 2003
    5,058
    #1 chaa, Nov 18, 2004
    I have T15, T20, T25, T30, T35 and T40, but i cant get anyone of them to fit the two TORK bolts at the rear of a 355 air bag wheel. They are TORK bolts are they not?? Can any one shed any light on the size/type of tool for the counter sunk bolt heads please.
     
  2. bonneaud

    bonneaud Karting

    May 3, 2004
    84
    #2 bonneaud, Nov 18, 2004
    use a T-30 Safety -that is a TORX bit with a hole in its center. have fun.
     
  3. chaa

    chaa F1 Veteran

    Mar 21, 2003
    5,058
    #3 chaa, Nov 19, 2004
    thanks mate, and er welcome to the forum.
     
  4. chaa

    chaa F1 Veteran

    Mar 21, 2003
    5,058
    #4 chaa, Nov 22, 2004
    Well Boll*xs, that sh*t did not work. After finaly finding the TORX T30 with the hole in it....it did not work,wrong tool or size. Me thinks the guy above who posted his first post with an answer to my question is taking the P*ss. No wonder he says have fun, very funny butt head, i had to laugh as i sat there struggling, you had me.LOL! Probably a FOC member from the UK forum at a guess, LOL!
     
  5. maserati424

    maserati424 Rookie

    Apr 11, 2004
    29
    Berlin, Germany
    Full Name:
    frank gablenz
    #5 maserati424, Nov 27, 2004
    Won´t answer before cause the first answer was wrong for me ,but i don´t know for shure the right size on this Ferrari.
    If it is a TORX it is a special dize its T27.
    On every car with Torx screws i worked with ,it was this size .
    Hope it will help you.
     

Share This Page