348 squeaking noise while rolling | FerrariChat
Buy

348 squeaking noise while rolling

Discussion in 'Technical Q&A' started by 348SStb, Sep 30, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 348SStb

    348SStb F1 Rookie
    Owner

    Apr 9, 2004
    2,991
    Palm Beach County, FL or Nassau County, NY
    Full Name:
    Dave
    #1 348SStb, Sep 30, 2004
    My 348 squeaks while rolling. As I slow down, the interval between sqeaks increases (the frequency of squeaks decreases). When I speed up, the squeak frequency increases.

    I was told that 90% of the time, this occurs because the brake pad is rubbing, and that this should go away once the brakes are applied. However, when I apply the breaks the car is still squeaking while rolling!
     
  2. Juan-Manuel Fantango

    Juan-Manuel Fantango F1 World Champ
    Rossa Subscribed

    Jan 18, 2004
    14,896
    Full Name:
    Juan
    #2 Juan-Manuel Fantango, Sep 30, 2004
    Mine turned out to be a rear hub, don't ingnor it, the louder it gets the more it cost.

    I hightly recommed GT Auto Parts, a 1350.part cost me 50. there. Ask for Bill
    623-780-2200
     
  3. 348SStb

    348SStb F1 Rookie
    Owner

    Apr 9, 2004
    2,991
    Palm Beach County, FL or Nassau County, NY
    Full Name:
    Dave
    #3 348SStb, Sep 30, 2004
    Can you elaborate?
     
  4. FNU_LNU

    FNU_LNU Karting

    May 22, 2004
    196
    New England
    Full Name:
    AM
    #4 FNU_LNU, Jan 1, 2005
    JDAVID - what part?
     
  5. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,620
    The Brickyard
    Full Name:
    The Bad Guy
    #5 ernie, Jan 2, 2005
    Sounds like you may need new break pads. On most break pads there is a wear indicator. It will make that sound when the break pad has worn to a certain level. The indicator will rub againts the break disc, to create the noise. Have a look at the break pads to see how much you have left.
     
  6. rivee

    rivee F1 Rookie

    Jan 20, 2002
    3,731
    Nowhere important, USA
    Full Name:
    John
    #6 rivee, Jan 2, 2005
    If it is a hub bearing it would make a howling noise. Not a squeak.
     

Share This Page