308 stering rack | FerrariChat

308 stering rack

Discussion in 'Technical Q&A' started by jon s, Mar 16, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jon s

    jon s Formula Junior

    Joined:
    Mar 9, 2005
    Messages:
    509
    Location:
    pocasset ma
    Full Name:
    jon shoukimas MD
    thanks everyone the rear a arms are out and waiting for the new bushings. meanwhile, next project: the slight clunk in the rack. pulled the cover off the bottom last year with the front endup on blocks and looked up. removal of the rack looks like a horrible job. so, has anyone done a swap in the driveway flat on their back? if so tell me how bad it was and can it really be done without the car up on a lift? thanks jon s.
     
    jon s, Mar 16, 2005
    #1
  2. 308GTS

    308GTS Formula 3

    Joined:
    Dec 27, 2001
    Messages:
    2,223
    Location:
    TN
    Yes, I did it on jackstands. It wasn't that bad at all. After you unbolt everything pull the rack out the driver's side.
     
    308GTS, Mar 17, 2005
    #2
  3. jon s

    jon s Formula Junior

    Joined:
    Mar 9, 2005
    Messages:
    509
    Location:
    pocasset ma
    Full Name:
    jon shoukimas MD
    thanks for the encouragement; next winter's project. jon s.
     
    jon s, Mar 19, 2005
    #3

Share This Page