Radiator Repair Shop | FerrariChat

Radiator Repair Shop

Discussion in 'Northwest' started by 308tvb, Mar 26, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 308tvb

    308tvb Rookie

    Feb 21, 2005
    11
    Mercer Island, WA
    Full Name:
    Todd Biesold
    Hi, All-I have been lurking for a number of months and finally took the plunge. I have just returned from So. California with my "new" 1977 308GTB. The only known defect with the car is a small crack on the radiator between the tank and the core. I have already removed the radiator and would like to know if anybody has a recommendation for a radiator shop that can do the job properly the first time. Thank you for any help or recommendations.

    todd
     
  2. RED GTS

    RED GTS Formula Junior

    Jun 14, 2004
    578
    Full Name:
    Gungnir
    performance radiator in tacoma or seattle, Carlo at Alfa of Tacoma uses them and they were great for my 330 and 275
     
  3. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    17,913
    USA
    As long as it is being repaired, Carlo would probably recommend you have them cut it open and "rod it out" cleaning all the tubes inside. Then weld it back up. The 308/328 radiators are known to get a considerable amount of build up (plaque?) in the tubes that greatly reduces flow.

    Dave
     

Share This Page