348 Gearbox Fluid Filler Plug Size | FerrariChat
Buy

348 Gearbox Fluid Filler Plug Size

Discussion in 'Technical Q&A' started by sweetspotav, Apr 14, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sweetspotav

    sweetspotav Karting

    Nov 21, 2004
    122
    Florida
    Full Name:
    John Cawley
    #1 sweetspotav, Apr 14, 2005
    I searched the archives and couldn't find the size of hex wrench to purchase, anyone out there know before I purchase 6 different wrench sizes to find the correct one?

    10mm to drain...

    XXmm to fill?

    Appreciate your help!
     
  2. ferrarioldman

    ferrarioldman Formula 3
    Professional Ferrari Technician Silver Subscribed

    Jun 19, 2002
    1,035
    Summerfield, NC
    Full Name:
    Tom Jones
    #2 ferrarioldman, Apr 14, 2005
    The big plug on top takes a 19mm Allen but is a bit of a pain to get to so I made an adaptor to fill through the dip stick plug. 17mm socket or wrench to get that loose. The hole is pretty small so the tube that you may use will have to be small enough to fit in the hole. It is a little slower this way but you don't have to take things off to get to the big plug on top.
     
  3. sweetspotav

    sweetspotav Karting

    Nov 21, 2004
    122
    Florida
    Full Name:
    John Cawley
    #3 sweetspotav, Apr 16, 2005
    Thanks for the help. I'll try that out.
     

Share This Page