My 348 engine out procedure with pics | Page 4 | FerrariChat
Buy

My 348 engine out procedure with pics

Discussion in 'Technical Q&A' started by PassionIsFerrari, Apr 17, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 4 of 4
  1. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    29,266
    socal
    #76 fatbillybob, May 7, 2006
    And there is no cussing with a little heat and you put less stress on the steel lines and you lube the fitting to fixed pipe section when you use the FBB method. Use tools not force. Do be a wimp use the torch right Ernie???
     
  2. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,620
    The Brickyard
    Full Name:
    The Bad Guy
    #77 ernie, May 7, 2006
    Sometimes they like it rough. Hahahaa.
     
  3. PassionIsFerrari

    PassionIsFerrari Formula 3

    Aug 15, 2004
    2,454
    #78 PassionIsFerrari, May 7, 2006
    The one I am looking to remove is the one on the bottom left, in between the two beams of the subframe....

    When you say it can be taken off with two open ended wrenches...Do you mean one on the smaller steel line and one holding the big nut that it is threaded into....or the two nuts that are equal size in the middle...

    As for removing the bracket...Does it remove from underneath or ontop?
     
  4. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,232
    Mount Isa, Australia
    Full Name:
    Pap
    #79 PAP 348, May 7, 2006

    Yeah! Talk dirty to me ernie :eek: :D
     
  5. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,620
    The Brickyard
    Full Name:
    The Bad Guy
    #80 ernie, May 7, 2006
    Yes, but undo the ones closest to the passenger cabin. Be sure to remove the clamps that are holding both of the big conncetions to the side of the subframe. You will need to move the line so that you can get a wrench over the big connectors.
     
  6. pistole

    pistole Formula Junior

    Jan 31, 2005
    771
    Malaysia
    #81 pistole, May 11, 2006
    great thread !
    .
     
  7. Tifosi66

    Tifosi66 Formula 3

    Nov 30, 2004
    1,786
    Jiang Jia Jie
    Full Name:
    Li-Ge
    #82 Tifosi66, May 11, 2006
    Been following the thread too. Thanks for sharing Tmobile!

    Pistole...not surprised to see you here....
     
  8. pistole

    pistole Formula Junior

    Jan 31, 2005
    771
    Malaysia
    #83 pistole, May 11, 2006

    hey ... hehe ... its YB Chang .... Yang Berusaha ... lol !
    .
     
Page 4 of 4

Share This Page