Head light ring mounting for 330 GTC

It just pops on or off. There are three spring loaded clips that hold it on. If it's been a while since it was last off, I would use a wide putty knife. Insert it between the rubber seal and the chrome trim ring. A slight prying action should pop one clip loose. The just pull with your fingers for the other two. Keep one hand at the bottom so the ring doesn't pop off and hit the paint under the headlight.

 

There is a small hole in the trim ring, approximately 3 MM diameter, usually located at the bottom.

Fashion a tool from coat-hanger wire. Make a small "L" shaped hook on one end and a 3" diamater ring on the other.
Hook your fingers in the ring, insert the hook in the hole and pull gently - it will come right off.

Bob Z.

 

Great idea, I have never thought of using the drain hole to help remove it. If it has been off recently, I can just pull it off using my fingers.

 

Do they say Carello on them near the hole?

 

Do your buckets look like this?
Image Unavailable, Please Login

 

Carello is proper for your car.
Image Unavailable, Please Login