Dino Restoration

Some of those surfaces look a little rough or is it just my imagination? Did that car run right before you started this?

 

Jon, the nose of your Miura reminds me of the nose on the Hubert Hahne version of the Jota--minus h/l covers & Le Mans fuel filler behind the right side air outlet. Rob de la Rive Box and Richard Crump, in their book 'History of Lamborghini,' briefly describe the Jota: "This was the race version of the Miura completed by the factory. The German importer of Lamborghini cars, Hubert Hahn, constructed his own example of the Jota which was similar. It is thought that 8 of the German examples were finished."
On page 116 there is a b/w picture of "The Hubert Hahne version of the Jota." And, on page 117, a picture of "Hubert Hahne with his own Lambrorghini Jota" appears. 'sorry for the poor quality of the pics....
Image Unavailable, Please Login

 

Thanks for posting those photos and info. I like the look of the Jota (in addtion to the Miura).

Mark

 

23,000 over 30 years, that probably explains the look of some of those parts, like the sooty piston crowns. You'll be getting to re assembly soon and that's when I'll really pay attention cause I need something to remind me which bits went where!

 

We hope so, because we are all waiting peice by peice behind you for your excellent photographic records!!!!

 

Jon, my 30 months included approximately 18 months of waiting for body and paint guys to get off their butts and do something. They can really be a bunch of Primadonnas. Your body man seems to be working at light speed. It should take you half the time, if not less. Furthermore, your attention to detail is far greater than mine was.

Having fun yet?

Jim S.

 

You'll enjoy the Miura project, different build altogether.
Aluminum block, steel studs, aluminum heads - now that will be a task to take down and back up!

 

curious if u glass beaded the alum housings (bell housing etc)...i always thought that the glass bead would be too coarse & ruin the finish? I have used walnut shells but they dont make the parts look as clean as yours...

 

We are restoring a Miura S as well. Although yours looks to be in better condition then my customers
Image Unavailable, Please Login

 

I just noticed that my name popped up in post #570 in this thread. Yes indeed, I have the four issues of "Supercar Classics" that contain the multi-part article on restoring the Miura and converting it to SV specs. This was done on Martin Cliffe's car in England.

 

Sure. The exterior doesn’t look bad in pictures but its horrible. It was very sad to see it in that condition with rags and boxes resting on it like it was garbage.
Image Unavailable, Please Login

 

Jon,
Hope you went to softer media or lower presser in the blast cabinet. I have done a lot of abrasave finishing and there are so many ways. Aluminum is funny. You can either get a shot-peen or a cut surface. High pressure air and Alumina that is fine for steel will cut aluminum and you get a frosted surface that shows fingerprints and everything else that comes along. Hydra hone is glass beads in a water jet. You get a beautiful soft shot peen that looks like the Ferrari finish. Glass beads in an air jet can do the same job but the pressure has to be down around 30 psi and things go slow. At higher pressures the beads break and the sharp edges cut the aluminum surface. Ground walnut shells or plastic media are fine at higher pressures and give the soft satin finish but take longer to get rid of the crud..

Bottom line: Cut lightly if you are going to paint. Peen if you are going to leave aluminum natural. Glass beads are the most versatile media. Just takes a delicate touch with soft metal.

Things are coming along nicely. Great pictures. Keep it up!
The Muira will be an adventure but the Dino will have well prepared you for the task. Look forward to the vicarious ride.

John

 

What's happening? I'm here with my mug of cocoa waiting for an update...No matter how small.

Mike