Next week you can buy a Pertronix Ignitor for a carb 308 at Summitracing for $200! | FerrariChat
Buy

Next week you can buy a Pertronix Ignitor for a carb 308 at Summitracing for $200!

Discussion in '308/328' started by carb308gtb, Feb 15, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. carb308gtb

    carb308gtb Karting

    Oct 20, 2006
    188
    Svezia
    Full Name:
    Patrik
    #1 carb308gtb, Feb 15, 2007
    I contacted Summitracing regarding this NEW Pertronix for the euro carb 308, see below./Patrik

    "Subject"
    Can I buy a Pertronix Ignitor part# MR-181 from Summitracing!

    Discussion Thread
    Response (Ken) 02/15/2007 04:20 PM
    Patrik,

    Thank you for contacting us with your request.

    We have contacted the manufactuer and added the new part number to our system.

    1 PNX-MR-181 IGNITOR $200.39 *Special Order*
    *Special Order* = Part must be ordered from the manufacturer on your behalf. There is usually an estimated 14-21 day wait on special order items to arrive to Summit Racing from the manufacturer. Additional time may be needed if the parts are not “on the shelf” at the manufacturer.

    Please note: It will take 3-4 business days for newly added items to become available through the Internet.""
     
  2. Steve King

    Steve King F1 Rookie

    Feb 15, 2001
    4,367
    NY
    #2 Steve King, Feb 15, 2007
    What does this include. Does it come mounted and indexed so all you need to do is remove the present points and mount the plate. Also I assume that the rotor divice is for an 8cyl. I wonder if this would fit in a twin dizzy US set up. Interesting.
     
  3. carb308gtb

    carb308gtb Karting

    Oct 20, 2006
    188
    Svezia
    Full Name:
    Patrik
    #3 carb308gtb, Feb 15, 2007
    Not sure, but I think your right, just remove the points and mount the plate, about 15 minutes and your done.

    The Pertronix pdf catalog can be downloaded here, about 12MB: http://www.pertronix.com/ignition_products/ignition_catalog.htm
     
  4. Sean F.

    Sean F. F1 Rookie

    Feb 4, 2003
    3,067
    Kansas
    Full Name:
    Sean F
    #4 Sean F., Feb 15, 2007
    The notes in the catalog say it's for 8-cyl Euro models only.
     
  5. bwassam

    bwassam Formula Junior

    Jan 3, 2005
    635
    North Bend, Oregon
    Full Name:
    Robert Wassam
    #5 bwassam, Feb 16, 2007
    I've heard that Ford distributor caps will fit the ferrari distributor. I don't know this for sure. Nor do I know which model and year to buy for this application. Perhaps someone on the list can enlighten us.

    Bob Wassam
     

Share This Page