308 part number needed | FerrariChat
Buy

308 part number needed

Discussion in '308/328' started by ragtop1, May 5, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ragtop1

    ragtop1 F1 Veteran
    Silver Subscribed

    Nov 11, 2006
    5,258
    Ontario
    Full Name:
    Larry Warren
    #1 ragtop1, May 5, 2007
    Does anyone have the part # for the screws that hold in the door hinges. There are 3 allen flat heads for each of the four hinges. They are so worn, I can't adjust them to align the doors properly. (79 308gts) My parts manual omitted them for some reason. Thanks in advance.
     
  2. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,831
    Cerritos, CA.
    Full Name:
    Mike
    #2 miketuason, May 5, 2007
    I just bought 9 stainless grade 8 torxs type screws to replace all the screws on my 308 from a good fastener shop. I think torx screws can take more torque than a regular allen screws.
     
  3. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,124
    Savannah
    #3 thecarreaper, May 6, 2007
    Last edited by a moderator: Sep 7, 2017
  4. ragtop1

    ragtop1 F1 Veteran
    Silver Subscribed

    Nov 11, 2006
    5,258
    Ontario
    Full Name:
    Larry Warren
    #4 ragtop1, May 6, 2007
    Thank you. I Usually buy from Dennis McCann ( www.allferrariparts.com) but its not in his inventory. I'll look for another supplier. :)
     
  5. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,124
    Savannah
    #5 thecarreaper, May 6, 2007
    welcome.
     
  6. 330gt

    330gt Formula 3

    Nov 12, 2004
    2,106
    Seattle, WA
    Full Name:
    Kerry Chesbro
    #6 330gt, May 6, 2007
    UK Ferrari (though the Classic Parts section of the Ferrari Owner's Site) shows:
    50206408 COUNTERSUNK SOCKET SCREW £0.24

    So they are still available.
     
  7. Brian Harper

    Brian Harper F1 Rookie
    Owner Silver Subscribed

    Feb 17, 2006
    4,078
    San Jose area
    Full Name:
    Brian Harper
    #7 Brian Harper, May 6, 2007
    I hope you didn't pay extra for grade 8 stainless. Genuine grade eight will be high strength steel alloy. Stainless isn't strong enough for grade eight specs, but it is probably strong enough to hold the door on.
     
  8. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,831
    Cerritos, CA.
    Full Name:
    Mike
    #8 miketuason, May 6, 2007
    Last edited by a moderator: Sep 7, 2017
    It's strong enough that I was able to torque it to spec without any problem. It's been 3mo. since I've put this new bolt and the doors have been straight and haven't move not one mm. Photo on the left is the original and the one on the right is the new torx stainless bolt.
    Image Unavailable, Please Login
     
  9. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,831
    Cerritos, CA.
    Full Name:
    Mike
    #9 miketuason, May 7, 2007
    I forgot to add the new bolts are $1.65 ea.
     
  10. ragtop1

    ragtop1 F1 Veteran
    Silver Subscribed

    Nov 11, 2006
    5,258
    Ontario
    Full Name:
    Larry Warren
    #10 ragtop1, May 7, 2007

    perfect. thank you
     

Share This Page