Ansa Sport question | FerrariChat

Ansa Sport question

Discussion in '308/328' started by bergxu, Jun 4, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bergxu

    bergxu Formula 3

    Aug 16, 2005
    1,307
    OnTheSerpentMound
    Full Name:
    Aaron
    I'm curious to know if I'll be able to still use my valence around the muffler once I install the Ansa Sport. I actually prefer the "diaper" around the exhaust as it gives the car a lower looking appearance from the back. So any of you out there who have aftermarket exhausts on your 308s, please chime in, specifically those with Ansa systems. TIA!

    Cheers,
    Aaron
    '82 GTSi
    '83 400iA
     
  2. phylotic

    phylotic Formula Junior
    BANNED

    May 20, 2007
    547
    US/EU
    Full Name:
    Gheorghe
    On a GT/4 with Ansa sport it is perfectly OK.
     
  3. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,831
    Cerritos, CA.
    Full Name:
    Mike
    Usually ANSA are design to just bolt on their system with out any modification so you can still use the original hangers and stuff. Although you may have to adjust the lateral, horizontal, and tilt position.
     
  4. dstacy

    dstacy F1 World Champ
    Owner

    Jan 23, 2006
    11,999
    GMT -5 & GMT +1
    Full Name:
    Dave
    #4 dstacy, Jun 4, 2007
    Last edited by a moderator: Sep 7, 2017
  5. bergxu

    bergxu Formula 3

    Aug 16, 2005
    1,307
    OnTheSerpentMound
    Full Name:
    Aaron
    Looks good but I hope it'll work on a GTSi!
     
  6. phylotic

    phylotic Formula Junior
    BANNED

    May 20, 2007
    547
    US/EU
    Full Name:
    Gheorghe
  7. bergxu

    bergxu Formula 3

    Aug 16, 2005
    1,307
    OnTheSerpentMound
    Full Name:
    Aaron
    I hope so, as I understand there are differences between the GT4 and the GTSi muffler, so I'm hoping the general dimensions are at least similar.
     
  8. miked

    miked Formula Junior

    Feb 7, 2001
    912
    Cincinnati, Ohio
    My GT4 has an Ansa exhaust (installed by the PO.) that is actually for a carb GTB. The mounting brackets were repositioned to match up with those on the car. Everything else fits just fine.
     

Share This Page