Anyone Ever Order Braided Hose From This Place? | FerrariChat

Anyone Ever Order Braided Hose From This Place?

Discussion in 'Technical Q&A' started by Jerrari, Sep 10, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jerrari

    Jerrari F1 Veteran

    Jul 24, 2001
    5,469
    Michigan
    Full Name:
    Jerry Wiersma
  2. gabriel

    gabriel Formula 3

    Looks like weatherhead hose in metric. NAPA sells 5/8" ID (15.8MM) weatherhead for $5-$6 a foot.
     
  3. bpu699

    bpu699 F1 World Champ
    Owner Silver Subscribed

    Dec 9, 2003
    17,825
    wisconsin/chicago
    Full Name:
    bo
    Hmmm... I was thinking about replacing the fuel/water hoses on the testarossa too...

    Finding the braided stuff is almost impossible. It is available in some limited sizes in the porsche/bmw communities...

    Would it be "accepted" to replace it with regular fuel/radiator hose??? Also, try to find the original clamps...I have had zero luck.

    Seems to me that a lot of folks in the ferrari community look down on using more mundane replacement parts, but getting the original stuff is near impossible...

    What are others using? Gates? etc?
     
  4. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,221
    Twin Cities
    Full Name:
    Tim Keseluk
    Use whatever hose is appropriate (always better than keeping the old dried out stuff just because it's original).

    Just be sure to use the correct hose for the application.

    Coolant hose for coolant

    Only fuel hose for fuel
     
  5. gabriel

    gabriel Formula 3

    #5 gabriel, Sep 11, 2007
    Last edited by a moderator: Sep 7, 2017
    Look at the picture below.

    The short hose is what I just replaced with the other hose for the fuel tank to pump run.

    Weatherman 5/8" (15.8mm) from NAPA at $5.00 a foot.

    Same thing, or so close that there is no discernable difference..
    Image Unavailable, Please Login
     
  6. bpu699

    bpu699 F1 World Champ
    Owner Silver Subscribed

    Dec 9, 2003
    17,825
    wisconsin/chicago
    Full Name:
    bo
    Does napa have it in many other sizes? Good find. I checked autozone/etc and couldn't find it...
     
  7. BIGHORN

    BIGHORN In Memoriam

    Sep 18, 2006
    733
    FLORIDA/NEW MEXICO
    Full Name:
    JOHN F KELLY
    Summit has a good selection of SS braided hose that does not require AN fittings
     
  8. gabriel

    gabriel Formula 3

    Yes, I believe that they do.
     
  9. Dr_ferrari

    Dr_ferrari Formula 3
    Consultant Professional Ferrari Technician

    Nov 2, 2003
    1,073
    Pocono Sportscar
    Full Name:
    Jim McGee

    For all my hose replacement I use Industrial hose and supply in Shohola, Pa. 570-296-5551 and as for steve. they do very nice custom work.

    They can reproduce just about anything from stainless braided oil line to cooling hoses and ship it to you.

    They also have a machine that is certified to make custom stainless and rubber brake line.

    Best regards, Jim
     
  10. decampos

    decampos Formula Junior
    Silver Subscribed

    Aug 11, 2005
    461
    Los Angeles
    Full Name:
    Ben
    Christ alive don't order anything from Demon Tweeks. I ordered braided hoses, they sent the wrong size, sent them back, they sent the wrong ones AGAIN, sent them back, they finally got it right but wouldn't refund me all the postage costs even though they were complete idiots in the wrong.
     
  11. 246tasman

    246tasman Formula 3

    Jun 21, 2007
    1,448
    UK
    Full Name:
    Will Tomkins
    I've always had good experiences with Demon Tweeks, but they're not usually the cheapest. I've just ordered a load of big diameter (-16 & -20) s/s braided oil hose & fittings from Summit and it works out about 60% price including the shipping to UK
     

Share This Page