Defroster vent removal ? | FerrariChat

Defroster vent removal ?

Discussion in '348/355' started by copterjon, Sep 19, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. copterjon

    copterjon Formula 3 Silver Subscribed

    Joined:
    Nov 11, 2005
    Messages:
    1,548
    Location:
    Mesa, Az.
    I'm repairing a few sticky items in my car and the removal of most everything is straight forward except for the defroster vents on the top of the dash. I've done a search where someone else asked the question but the only answer given was how to remove the a/c vents. Any help would great.
     
  2. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,489
    Location:
    Winston Salem, NC
    90-degree screwdriver. Do you have the little fascia/tabs covering the three screws? Pop them off, and you'll see the mounting screws.
     
  3. copterjon

    copterjon Formula 3 Silver Subscribed

    Joined:
    Nov 11, 2005
    Messages:
    1,548
    Location:
    Mesa, Az.
    Thanks Daniel, I do have the tabs or screw covers. I've seen other cars with just the screws exposed so I wasn't sure if I had covers or a later series vent perhaps. I didn't want to go at it too hard and break something expensive without asking.
     
  4. F348BE

    F348BE Karting

    Joined:
    May 9, 2006
    Messages:
    50
    Hey guys, Im thinking of spraying these to get that brushed aluminium look. What do you think? Anyone has any pics to see what they would look like?
     
  5. vvassallo

    vvassallo F1 Veteran

    Joined:
    Aug 4, 2006
    Messages:
    8,329
    Location:
    Palos Verdes
    Full Name:
    Vince V
    Far out, I had this same question. I got to get to mine one of these days too. :D Time to break out the EazyOff!

    As for the in-dash ones, they just pop out don't they?
     
    Last edited: May 20, 2009
  6. Miltonian

    Miltonian F1 Veteran

    Joined:
    Dec 11, 2002
    Messages:
    5,966
    Location:
    Milton, Wash.
    Full Name:
    Jeff B.
    The defroster vent surrounds are made of cast aluminum, so if you really want the "brushed aluminum" look, all you have to do is strip them and go over them with a Scotch-brite, but I think they will reflect pretty badly in the windshield if they aren't black.

    They are removed with three screws with 3mm allen heads, and the screws are way longer than necessary, about 1 1/4" long, so they take quite a bit of twisting in a confined space.

    Personally, to remove the black "glop", I just go to the laundry room sink and use Boraxo on it. Very easy, no smell, I just rub it on by hand and rinse it off.

    Yes, the in-dash ones are just held in place with tabs.
     
  7. F348BE

    F348BE Karting

    Joined:
    May 9, 2006
    Messages:
    50
    Thanks guys; but what you say re reflection makes allot of sense I guess!
     
  8. alanmawong

    alanmawong Rookie

    Joined:
    Nov 11, 2003
    Messages:
    29
    Location:
    Houston, Texas
    I would be careful about a shiny finish on the vents. In my case, I took the door levers off when they got sticky and had them chromed with a brush finish. I like the way they look and it makes it easier for passengers to find the handle, but there is a glare in the side window on a sunny day.

    I got used to it after a while, but that's in the side window. A glare on the windshield may be a totally different matter.
     

Share This Page