Wiper Blades? | FerrariChat

Wiper Blades?

Discussion in '365 GT4 2+2/400/412' started by Grumpy B, Oct 3, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Grumpy B

    Grumpy B Karting

    May 31, 2005
    183
    South Bay
    Full Name:
    Don
    #1 Grumpy B, Oct 3, 2007
    Out of curiosity, what have you 400 owners done about wiper blade replacement (other than not driving in the rain)? I've seen a few different things done such as complete removal of the wiper arms, complete arm replacements. Ours haven't been replaced in years and we have not been able to find the correct size state side as they are an odd size (they are 10mm arm and most are 6mm or 8mm). Ideas, suggestions?
     
  2. SouthJersey400i

    SouthJersey400i Formula 3

    Mar 14, 2007
    1,603
    Romulus, NY (Finger Lakes)
    Full Name:
    Ken Battle
    #2 SouthJersey400i, Oct 4, 2007
    I replace just the slide in rubber piece. It took my friendly NAPA guy about 15 minutes to get the right ones. I'll check later this evening if I recorded the part number.
    Ken
     
  3. Grumpy B

    Grumpy B Karting

    May 31, 2005
    183
    South Bay
    Full Name:
    Don
    #3 Grumpy B, Oct 5, 2007
    Really? Napa? That part number is a must have here. Thanks!!

    Don
     
  4. SouthJersey400i

    SouthJersey400i Formula 3

    Mar 14, 2007
    1,603
    Romulus, NY (Finger Lakes)
    Full Name:
    Ken Battle
    #4 SouthJersey400i, Oct 6, 2007
    Driver's side - 60-1914 (19")
    Passenger - 60-1814 (18")

    Hope you can find them.
    Ken
     
  5. Grumpy B

    Grumpy B Karting

    May 31, 2005
    183
    South Bay
    Full Name:
    Don
    #5 Grumpy B, Oct 6, 2007
    Thanks we're going to try!
     

Share This Page