your top 5 Most Wanted models

A large scale hand-made or kit of the Moretti 750 bialbero Zagato I once owned

the same of the blue and silver FIAT/Stanguellini Ala d'Oro coupe that has been on some of the MM revivals, and actually ran in the 1947 MM

the same of the spider version of that car, two of which ran in the 1948 Mille Miglia.

I am actually working on building a super-detailed 1/43rd of the spider, with a scratch built motor. It will have opening doors, engine hood, etc. I am using 2 kits of the car made by Lilliput/History models, and obscure maker of "etceterini" models, from Italy. Their factory builts are not very well done, and have no opening parts. I will also be correcting everything that is inaccurate.

 

Not exactly the ones you are looking for, but Profil24 makes a 712 Can-Am and there is a kit for a 250 MM Vignale spider out there using the 166 MM by Hot Wheels as a base. See: http://www.legende-miniatures.com/catalogues/bv000019.jpg
Also BBR will be building the 340/375 MM Vignale spider with the fin that Phil Hill drove.

 

thanks
would what type of money are we talking about

 

I collect 1/18 models and I would wish the following models to be produced (but as far as I know aren't):

- Ferrari 512 S or M
- Lancia Delta S4 (to fill the gap in the Fulvia-Stratos-037-Delta Integrale series)
- Ferrari 195 Inter Ghia coupé s/n 0105 (I've had the pleasure of driving this car)
- 250 GT Boano
- 312 F1 1967

The ones that are announced or are available and that I want to buy in the near future:

- Lancia Fulvia by AutoArt
- Ferrari 512 BB/LM by BBR
- 500 F2 by Exoto
- 575 GTC by Kyosho
- 365 GTB/C Pozzi by Kyosho

The ones that are available but in poor quality and I hope somebody like Exoto or CMC would make them:

- 246 GT Dino
- 250 GT Lusso
- 250 LM
- 250 GTO
- F40 LM

 

The 250 MM by Legende Miniatures is quite expensive: 260 euro (plus shipping). But it comes in a nice wooden case.
The 712 Can-Am is a kit (but painted) and costs 249 euro (plus shipping).

So it's in the same ballpark as Exoto and BBR but not as "common". I can't say much about the quality because I've only seen pictures.

 

thank you for your help
do you have a web address for them or mail address so i can contact them

 

You can try www.legende-miniatures.com for the MM and www.scuderiamodelli.com for the 712.

 

In 1:18

1. F 2005 Michael Schumacher
2. F 248 China MS
3. FXX Super Elite #30 MS
4. BBR Enzo
5. F 575 GTC Black Matte Kyosho

 

1. Lancia Martini Delta S4
2. F40 LM
3. 312 spider
4. 512 BB LM
5. Alfa 308

All in 1/24.

 

mine would be all 1/18

1. Elite F355 GTS Red/Tan
2. Elite 512TR Silver/ Tan
3. LP640 Roadster White/Black
4. P4/5
5. 330 GTS Deep Red/ Tan

 

1. Minichamps Papaya McLaren F1
2. Elite FXX #30
3. Amalgam Alfa Romeo Monza
4. Minichamps 1996 Ferrari F310
5. CMC W25

 

In 1/43 :
FXX #30 ...
599 white ...
360 CS blue TdF
zonda F
F 2007

 

if i ve got news i keep them FOR ME! hahaha no seriously there s many versions i want it to know, i like the 250 Tr 58 for customers

 

Just to give some of you a heads up, a little birdie told me that some of these models are in the works.

 

Wow! Top 5 uh? I can probably think about 50.
But here is what I think I would like to have.
1.Ferrari 288 1:12 (to complete my supercars display)
2.Ferrari 330P3/4 / 412P in 1:18 by someone like CMC or BBR
3.Ferrari TR 50's in 1:18 (I don't care which year, they are all gorgeous and iconic) again by the likes of CMC
4.Any of the "bastards" in 1:18. I call these three bastards as they were not 100% Ferrari made- 288 Evoluzione, F40LM, F50GT. Again by at least Kyosho.
5.Ferrari 512M (LM) Sunoco livery 1:18 by Exoto.

This was extremely hard to put together. What made it slightly easier is the fact that many cars that would normally fight for the top five honors on my list have been announced as being in the works:
Ferrari 275 GTB 1:18 Exoto
Ferrari 250 GTO 1:18 Exoto
Ferrari 156 F1 "Sharknose" 1:18 Exoto
Ferrari 126C2 F1 1:18 Exoto
Ferrari 246F1 1:18 Exoto
Ferrari 512 BBiLM

 

Check out this link:

http://www.grandprixmodels.co.uk/shop/result.asp?pg=&schRef=&schCarType=Ferrari+250&schYear=&schDriver=&schSponsor=&schEvent=&schScale=1%3A12&schManufact=All&schKit=KIT&myID=&sav=Future&t=None&c=&#res

As for the list I would want:

1. P4/5 any scale
2. 599 GTB 1/24 by Tamiya
3. 365 P 1/18
4. Dino 206 GT (Paris) 1/18
5. 250 TR 1/64 Hot Wheels

-F

 

- mc12 roadster
- black 599 with black rims
- yellow carrera gt
- veyron
- and some ferrari supercar (f40,enzo,f50) or some lambo

 

No such thing exists.

 

I really only have one.......




Lambo 6.0. I was so excited when AutoArt was going to release this years ago. Then of course it was scrapped due to whatever b.s. they told me.

 

1. Ferrari 365 GTB4 Daytona Competizione, Tour de France winner, Thomson livery. right now being built by Laurent Tay of Garage43.
2. Ferrari 365 GT California. AMR kit. To be built by Laurent Tay of Garage43.
3. Ferrari 212 Inter, s/n 0263 EU by BBR. Awaiting delivery.
4. Ferrari 250 Testa Rossa pontoon-version by Shin Collection. Way out of my financial league.
5. Ferrari 250 GT Lusso "Steve McQueen" by BBR. On order.

of course all in 1:43. 1:18 have no serious place in high end , handbuilt miniatures. No where is my fire-protective suit?

 

Lambo 6.0... that's what I have in my 1/18 collection. They are resin models and professionally built by Japanese modeler
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

I don't have a list but my holy grail would be any 1/10 Michele Conti Ferrari. (Just wish I can afford it!)

 

all in 1/18:
- AA Yellow Diablo SV
- Diablo 6.0 VT (a diecast!)
- HW 1998 Ferrari F300 MS
- F50 GT1
- HW F430 Scuderia (all colors!)

 

- AA Yellow Diablo SV - I have one
- Diablo 6.0 VT (a diecast!) - not exist in market
- HW 1998 Ferrari F300 MS - still help you to look for it
- F50 GT1 - diecast available in MDS or LMM.... which one do you like?
- HW F430 Scuderia (all colors!)[/QUOTE]

 

Maserati MC 12 1:12 in road or race version
Not as a diecast, but as a handbuilt or kit!!!
www.abcbrianza.com