Any turbo 348's? | FerrariChat
Buy

Any turbo 348's?

Discussion in '348/355' started by rhunt, Nov 14, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rhunt

    rhunt Karting

    Nov 20, 2003
    51
    #1 rhunt, Nov 14, 2007
    I bought my 348 a few months ago and am thinking about having a custom turbo built for it. Is there any weak links in the engine that I should replace? I.E pistons etc? What can I use for engine management? Any help is greatly appreciated.

    Rob
     
  2. vvassallo

    vvassallo F1 Veteran

    Aug 4, 2006
    8,329
    Palos Verdes
    Full Name:
    Vince V
    #2 vvassallo, Nov 16, 2007
    Obviously due to the high compression you will want to keep the boost down to a sedate level. Heat management is going to be key. I am moving down the normal aspiration path, but charging is always fun to think about. Naturally, your ECU is not up to the task of fuel delivery, so you should look to reprogrammed chips. Also, you might want to upgrade the fuel lines at the lower filter attachments (per group77racing's instructions) as you will find in a search here and your injectors. Ask Plugzit for the part numbers for 24 lb. injectors compatable with the 348.
     
  3. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,232
    Mount Isa, Australia
    Full Name:
    Pap
    #3 PAP 348, Nov 16, 2007
    Pappy was thinking about blowing his 348.............but never got around to it. ;);)
     
  4. rhunt

    rhunt Karting

    Nov 20, 2003
    51
    #4 rhunt, Nov 19, 2007
    Hopefully I will get started with the project right after New Years. I am looking to get it to around 400BHP so a modest boost level is all that will be required. Is there a hack to get into the factory ECU to do the programming from a laptop?
     

Share This Page