Please help - 360 seatbelt replacement | FerrariChat
Buy

Please help - 360 seatbelt replacement

Discussion in 'Technical Q&A' started by SoftwareDrone, Dec 12, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SoftwareDrone

    SoftwareDrone F1 Veteran
    Sponsor Owner

    Jan 19, 2004
    7,871
    San Jose, California
    Full Name:
    Mike
    #1 SoftwareDrone, Dec 12, 2007
    Last edited by a moderator: Sep 7, 2017
    I have the exploded diagram showing what fasteners to remove to replace the seat belt retractor unit, but what I don't have it knowledge on how to remove this leather cover that shrouds the seatbelt assembly. Has anyone here ever removed one?
    Any help would be appreciated.
    :)
    Image Unavailable, Please Login
     
  2. SoftwareDrone

    SoftwareDrone F1 Veteran
    Sponsor Owner

    Jan 19, 2004
    7,871
    San Jose, California
    Full Name:
    Mike
    #2 SoftwareDrone, Dec 13, 2007
    30 views and no answer? Not a problem, as a quick call to friendly Brian Crall gave me everything I need to complete this project. Of course if people had not run him off of this forum, the answer would have been posted for everyone to see.
     
  3. billwann

    billwann Formula Junior

    Jan 5, 2004
    324
    Bristol Wisconsin .
    Full Name:
    Bill Wann
    #3 billwann, Dec 14, 2007
    Be careful , Those clips that hold that panel on are real fragile . I found it best ti just replace them you can get the at most auto part stores .
     
  4. Schumi76

    Schumi76 Formula Junior

    Feb 15, 2006
    329
    NC
    Full Name:
    Marco
    #4 Schumi76, Dec 14, 2007

    +1
     
  5. walkaway

    walkaway Rookie

    Nov 21, 2007
    40
    Full Name:
    walkaway
    #5 walkaway, Dec 16, 2007
    1. pull off the small adjuster button by firmly pulling down on it
    2. lift the bigger tab and undo 17mm nut
    3. remove lower section of door seal (don't go to high coz it can be awkward to get back in place at the 1/4 window)
    4. pull off cover starting from the bottom. (the plastic slide plate where the studs come through is very fragile and cracks very very easy, though its a minor thing)

    you can generally reuse the holding clips but can be better to replace them for tighter grip. make sure they're lined up properly when refitting
     
  6. Finitele

    Finitele Formula 3

    Sep 26, 2007
    1,379
    DBC
    Full Name:
    DIR
    #6 Finitele, Jan 8, 2008
    Hi Mike,

    How did they run him off?
    Why won't he come back?
     

Share This Page