360 F1 clutch change | FerrariChat

360 F1 clutch change

Discussion in 'Technical Q&A' started by traknut, Feb 18, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. traknut

    traknut Karting

    Joined:
    Mar 30, 2006
    Messages:
    121
    Does anyone know what it costs to change a clutch in a 360 F1?
     
    traknut, Feb 18, 2008
    #1
  2. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,234
    Location:
    Mount Isa, Australia
    Full Name:
    Pap
    How long is a piece of string? ;);)
     
    PAP 348, Feb 18, 2008
    #2
  3. traknut

    traknut Karting

    Joined:
    Mar 30, 2006
    Messages:
    121
    Hey, I could ask my local dealer, but I want an honest answer first. Anyone?
     
    traknut, Feb 19, 2008
    #3
  4. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,234
    Location:
    Mount Isa, Australia
    Full Name:
    Pap


    Thats the trouble Nick, you have to a little be more specific. :):)

    Do you want to know a price on parts to do the clutch yourself? Do you want to know a price from an independant Ferrari mechanic? Do you want a dealer price? Who will be doing the job??? :):)

    There are too many variables. Too many different labour costs and parts prices ect.... :):)

    I have seen prices vary A LOT on here, so it is a really hard question to answer, if you understand where I am coming from? :):)

    Perhaps, ask your dealer Nick, then shop around after that mate. I am sure you can save a few dollars by doing that mate. :):)
     
    PAP 348, Feb 20, 2008
    #4
  5. mgtr1990

    mgtr1990 Formula 3

    Joined:
    Mar 30, 2005
    Messages:
    1,580
    Location:
    Naples Florida
    Full Name:
    Martin Graham
    I had mine done during the major service and it was $3000 bear in mind some of the labor was already in the major service stripdown
     
    mgtr1990, Feb 20, 2008
    #5
  6. traknut

    traknut Karting

    Joined:
    Mar 30, 2006
    Messages:
    121
    Thanks for the info. My clutch is still working great, but I have about 15k miles on it so I was just curious.....Nick
     
    traknut, Feb 20, 2008
    #6
  7. tstafford

    tstafford Formula Junior

    Joined:
    Mar 4, 2006
    Messages:
    754
    Location:
    Nashville
    Full Name:
    Tim
    Not too bad. What parts were replaced (pressure plate, flywheel, throw-out bearing, etc.)? I'm not an expert so if those parts are wrong, sorry. Just wanting to understand (and plan for the future)!

    Thanks.
     
    tstafford, Feb 24, 2008
    #7
  8. mgtr1990

    mgtr1990 Formula 3

    Joined:
    Mar 30, 2005
    Messages:
    1,580
    Location:
    Naples Florida
    Full Name:
    Martin Graham
    Let me check the invoice tonight and I will give you the complete list rather than try to remember
     
    mgtr1990, Feb 25, 2008
    #8
  9. duskybird

    duskybird F1 World Champ Owner Rossa Subscribed

    Joined:
    Jan 20, 2007
    Messages:
    12,702
    Location:
    29 Electoral Votes
    Full Name:
    Bill B.
    What year? 3 or 6 bolt ring gear?
     
    duskybird, Feb 25, 2008
    #9
  10. traknut

    traknut Karting

    Joined:
    Mar 30, 2006
    Messages:
    121
    2001 F1
     
    traknut, Feb 25, 2008
    #10
  11. mgtr1990

    mgtr1990 Formula 3

    Joined:
    Mar 30, 2005
    Messages:
    1,580
    Location:
    Naples Florida
    Full Name:
    Martin Graham
    Tim as promised the Transmission work was as follows
    Throw Out Bearing and Sleeve
    Bearing Support Flange
    Complete Clutch Assembly both plates
    Sensor Kit
    Thrust Bearing
    All Gaskets,seals , Pins, Washers etc.
     
    mgtr1990, Feb 27, 2008
    #11
  12. dj39355

    dj39355 Karting

    Joined:
    May 22, 2006
    Messages:
    116
    Location:
    NORWAY
    Full Name:
    Jostein Ferkingstad
    I wonder about very much the same as the thread starter since I got a price from my workshop which was far away (higher) than expected.
    Thats include a flywheel change which I guess is the main reason why it was that expensive. Clutch working fine, but I know that I would have to change it "sooner or later".

    What year did the change the starter ring ? I know that the Ferrari issued a safety recall on the starter ting for year model 99 and 2000, have checked the VIN number on my 01 Spider and that was OK. Then I guess that if my workshop is correct that the Ferrari must have changed to a 6 bolt ring gear later? or are they wrong (hopefully:)

    Appreciate any feedback

    Best Regards

    Jostein
     
    dj39355, Mar 10, 2008
    #12

Share This Page