Titanium rods ? | Page 4 | FerrariChat
Buy

Titanium rods ?

Discussion in 'Technical Q&A' started by duck.co.za, Mar 18, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 4 of 4
  1. duck.co.za

    duck.co.za Formula 3

    Jan 9, 2007
    1,007
    Cape Town South Afri
    Full Name:
    Dave
    #76 duck.co.za, Mar 30, 2008
    Mark would you post the size of the small end boss (OD) and clarify a 20mm pin diameter .I need the pin boss OD for underside piston crown clearnce . I assume is the same tickness (across the pin )
    Thanks Dave
    " Assumptions are the mother of all _____ups "
     
  2. duck.co.za

    duck.co.za Formula 3

    Jan 9, 2007
    1,007
    Cape Town South Afri
    Full Name:
    Dave
    #77 duck.co.za, Mar 30, 2008
    Now that's got to be the worst spelling ever !!
     
  3. mk e

    mk e F1 World Champ

    Oct 31, 2003
    13,812
    The twilight zone
    Full Name:
    Help me get this thing finished! https://gofund.me/39def36c
    #78 mk e, Apr 9, 2008
    I now know why 355 and 360 rods have different part numbers.....they're slighly different rods. The 355 rod uses the OD of the bolt to align the rod and cap (bolt shown in post 72), the 360 rod uses alignment sleeves that press fit into the rod and slip fit into the cap and the bolt drops through the middle. No more mystery :)
     
  4. mk e

    mk e F1 World Champ

    Oct 31, 2003
    13,812
    The twilight zone
    Full Name:
    Help me get this thing finished! https://gofund.me/39def36c
    #79 mk e, Apr 10, 2008
    Last edited by a moderator: Sep 7, 2017
Page 4 of 4

Share This Page