ENGINE LINERS | FerrariChat
Buy

ENGINE LINERS

Discussion in '308/328' started by rizzo308, Jul 2, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rizzo308

    rizzo308 F1 Rookie
    BANNED Silver Subscribed

    Sep 12, 2004
    2,784
    Perth, Australia
    Full Name:
    riggio
    #1 rizzo308, Jul 2, 2008
    so my 308i engine is stripped down .. my pistons are shot i am gonna need a rebore and new set of oversize pistons i hear JE pistons are the go anyone used these pistons in the cars............ cheers
     
  2. Pizzaman Chris

    Pizzaman Chris F1 Rookie

    Mar 13, 2005
    3,919
    New Hampshire
    Full Name:
    Pizzaman Chris
    #2 Pizzaman Chris, Jul 2, 2008
    Rizzo, what did you do to that poor little engine??:eek:

    I was thinking the same way with JE.
     
  3. regisgtb4

    regisgtb4 Formula Junior
    BANNED

    Mar 20, 2007
    463
    tx
    Full Name:
    willis
    #3 regisgtb4, Jul 2, 2008
    I have used them,I sent an old piston and ordered .010 over new forged pistons.Had a muscle car engine shop bore ten over,they are much nicer than borgo.
     
  4. rizzo308

    rizzo308 F1 Rookie
    BANNED Silver Subscribed

    Sep 12, 2004
    2,784
    Perth, Australia
    Full Name:
    riggio
    #4 rizzo308, Jul 3, 2008
    Hi Chris ...i've been fangin it to much i think... (drive it like u stole it i say ) will be going for a 20 thou oversize rebore .... my engine guy wants to pop the liners out fit new seals .... felt a little bit dizzy wen he said that i dont no if i wanna be heading down that path (can of worms and all that sh#t) there was no leaking issues the water jackets look in great shape no corrosion down there he suggested while the engines stipped why not.............regisgtb4 wat did the pistons set you back plz
     
  5. regisgtb4

    regisgtb4 Formula Junior
    BANNED

    Mar 20, 2007
    463
    tx
    Full Name:
    willis
    #5 regisgtb4, Jul 3, 2008
    They were $90 each.They also offer top coatings for high pressure applications
     

Share This Page