Right Hand Inner Tie Rod | FerrariChat
Buy

Right Hand Inner Tie Rod

Discussion in '348/355' started by unimatrices01, Jul 11, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. unimatrices01

    unimatrices01 Rookie

    Jul 11, 2008
    2
    #1 unimatrices01, Jul 11, 2008
    I'm looking for a right hand inner tie rod for a 348 TS 1992. I'm getting huge quotes and was wondering if anyone out there can guide me to a vendor that could/would provide a re-build, or a decent price.

    Thanks.
     
  2. Kaivball

    Kaivball Three Time F1 World Champ
    Owner

    Jan 11, 2007
    35,997
    Kalifornia
    #2 Kaivball, Jul 11, 2008
    Unfortunately, they don't sell the inner tie rod separately. You have to buy the whole steering rack assembly to my knowledge. It's about $2.6k, right?
    They only sell the outer tie rod.

    However, if someone is able to find one, I am looking for the same one... :)

    Kai
     
  3. mseals

    mseals Two Time F1 World Champ
    Lifetime Rossa Owner

    Sep 9, 2007
    24,468
    Kuwait
    Full Name:
    Mike Seals
    #3 mseals, Jul 11, 2008
    Does it have a separate part number? If not, what's the part number for the rack?

    Mike in Kuwait
     
  4. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    #4 Miltonian, Jul 11, 2008
    The steering rack is part #155566 (for LHD cars). Even on the Ricambi site, it's $3700.
     
  5. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,232
    Mount Isa, Australia
    Full Name:
    Pap
    #5 PAP 348, Jul 11, 2008
    Can anyone give me the 'dimensions' of it? :):)

    Length and thread diameter on both ends of it?? :):)
     
  6. windsock

    windsock Formula 3
    Rossa Subscribed

    Nov 29, 2006
    1,161
    #6 windsock, Jul 11, 2008
    Dissassemble and document demensions. Moog can match them. I no longer have the part number this is available for most inner and outer tie rod ends.
     
  7. unimatrices01

    unimatrices01 Rookie

    Jul 11, 2008
    2
    #7 unimatrices01, Jul 14, 2008
    Thanks for the info folks. I seem to have been able to find the part at Ricambi for a little over $250.00 USD. There are two versions, the difference being a type of nut, therefore you need to know which version is required (even for a same year car). I trust this will work because here (in Canada) some guys were quoting almost $6K for the parts (cause they don't sell the parts separately).
     
  8. Kaivball

    Kaivball Three Time F1 World Champ
    Owner

    Jan 11, 2007
    35,997
    Kalifornia
    #8 Kaivball, Jul 15, 2008
    what's the part number?
     
  9. mwhitesell

    mwhitesell Formula 3

    Sep 17, 2006
    1,083
    Atlanta
    Full Name:
    Mark
    #9 mwhitesell, Jul 16, 2008
    I've heard people say that most of the Ferrari tie rods are made by ZF and that they made Volvo ones very similar. There is a thread on the 456 side that has a conversion in depth using the volvo parts. There is also a guy in SC that will rebuild your whole rack for under 500 bucks and have it back to you in 48 hours with a lifetime warranty. I'm sure he can source the parts cheap. A lot of the 550/456 guys send their racks to this guy.

    http://atlantic-ent.com/index.html
     

Share This Page