ANOTHER 348 CHALLENGE GRILL UPDATE | Page 5 | FerrariChat
Buy

ANOTHER 348 CHALLENGE GRILL UPDATE

Discussion in '348/355' started by Husker, Jun 6, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 5 of 7
  1. rivee

    rivee F1 Rookie

    Jan 20, 2002
    3,731
    Nowhere important, USA
    Full Name:
    John
    #101 rivee, Aug 21, 2008
    What in the hell would cause that?
     
  2. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,476
    Winston Salem, NC
    #102 Ricambi America, Aug 21, 2008
    I think it was the condition of the roads that we drove. There were some very rough (not potholes... but real bumpy) roads that we took in some rural areas. That's the only thing I can think of...

    The grill is pretty soft and flexible, but I suspect that particular location just gave up the ghost. No biggie. Its a 18 year old Ferrari 348 -- I'd say "par for the course" for the crap build-quality of these cars coachwork.
     
  3. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,234
    Mount Isa, Australia
    Full Name:
    Pap
    #103 PAP 348, Aug 22, 2008

    Maybe.........but maybe not. :p:p

    Ive been driving over CRAPPY/BUMPY roads for the last 3 years in my 348 and I have been very lucky to have a cracked rear grill like this. :eek::eek:

    I hope mine dont crack. I guess, it will then be time for a Husker grill. :p:p
     
  4. lusso64

    lusso64 Formula 3

    Apr 12, 2004
    1,535
    Simi Valley
    Full Name:
    David
    #104 lusso64, Aug 22, 2008
    Pap - at the speed you drive, you don't hit any bumps.... you just glide straight over the top :)
     
  5. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,234
    Mount Isa, Australia
    Full Name:
    Pap
    #105 PAP 348, Aug 22, 2008
    Lol!! Thats probably it! :p:p
     
  6. Benzino

    Benzino Karting

    Jul 6, 2005
    187
    Kent
    Full Name:
    Phil
    #106 Benzino, Aug 22, 2008
    jack Russell my 348 has done the same thing...but i have 65000miles of hard use!
     
  7. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #107 gothspeed, Aug 25, 2008
    Great to hear on the miles ........ I will get there some day ....... :eek:
     
  8. Husker

    Husker F1 World Champ

    Dec 31, 2003
    11,792
    western hemisphere
    #108 Husker, Aug 31, 2008
    I am almost embarrassed to keep posting about this, but anyway...

    We have found the proper metal piece for our panel that will provide the durability that is necessary for this to be a Ferrari-worthy part. I expect this to be mounted on my car by September the 10th at the latest. Of course, I originally had July 15th as my goal, but I'm obviously going to miss this and I apologize for it. I know you guys are being patient. Right now I'm beyond patient - I'm pissed. Be that as it may, I am GOING to see this project through and it is going to happen.

    Stay tuned.
     
  9. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #109 gothspeed, Aug 31, 2008
    That is what is really important :)!
     
  10. FandLcars

    FandLcars F1 Rookie

    Aug 6, 2006
    3,057
    Tempe, Az
    Full Name:
    Rick Schumm
    #110 FandLcars, Aug 31, 2008
    I think most here are happy to be patient and have you get it right, even though we're all eager to see the final result. I wouldn't worry if there are a few who may be critical... do what you have to do and don't worry about it! :)
     
  11. Husker

    Husker F1 World Champ

    Dec 31, 2003
    11,792
    western hemisphere
    #111 Husker, Sep 3, 2008
    UPDATE:

    I delivered an ultimatum today. Read below and tell me if it's rude. If I don't have the completed proto on my car by Sep. 12th, I'm scratching this and finding another maker. This manufacturing company is first class and I checked them out thoroughly, but I think this is such a small run it keeps getting pushed to the bottom. Anyway here was my email to them this a.m.


    _________, I know that you must be extremely busy with a multitude of projects, but if we can't get going on this part I would like to move on and figure something else out. I just realized that we are nearing 3 months since I mailed the piece to you. I think that should be sufficient time to get something developed.

    Part of my situation is that my credibility with potential buyers is somewhat at risk - I informed a number of them that I would likely have something to offer by the first of August.

    What I would propose is that, if don't think you can have something in my hands by September 12th to fit, I would appreciate it if you could just send me the proto type panel and taillights back so that I can get moving in another direction.

    I hope that you are not offended with this, but I feel that we have given this plenty of time to materialize. Just let me know your thoughts.
     
  12. sparta49

    sparta49 F1 Veteran
    Owner

    Mar 3, 2001
    7,804
    LA
    Full Name:
    Frank
    #112 sparta49, Sep 3, 2008
    I think it was firm and to the point but also polite, not rude at all. just my .02


     
  13. James-NZ

    James-NZ F1 Veteran

    Jun 26, 2007
    5,822
    Hamilton, NewZealand
    Full Name:
    James
    #113 James-NZ, Sep 3, 2008
    Perfect Husker, very well put. Gives a end point that will provide an outcome one way or the other. Excellent.

    Hang in there buddy, I don't need one of these as i have a 355 but I am just as interested to see this project break ground.
     
  14. 348guy

    348guy Karting

    Nov 28, 2007
    163
    Ashburn, VA
    Full Name:
    Rob
    #114 348guy, Sep 4, 2008
    Would it be worth a couple hundred bucks and time to fly out there and see what's going on? I'm sure you work for a living. I was just thinking that you'd get better service if you show up there. I know in dealing with suppliers in automotive and aerospace industries that is the case.

    Or have them photo what they have done so far. Maybe they haven't even started it yet. It's been known to happen.

    I also don't have a 348 but I'm really interested in your project. Good luck.
     
  15. potxoli

    potxoli Formula 3

    Mar 22, 2007
    1,716
    Washington DC
    Full Name:
    Eric B.
    #115 potxoli, Sep 4, 2008
    yes nothing beats the PV (physical visit). It is amazing how effective it can be....
     
  16. TomPDX

    TomPDX Formula Junior

    Mar 28, 2008
    558
    Oregon
    Full Name:
    Tom
    #116 TomPDX, Sep 4, 2008
    I think it was fine, not rude, but direct enough to hopefully get results! Well done. (and true! your credibility is shot!)
     
  17. TheOnlyest

    TheOnlyest Formula 3

    Sep 25, 2007
    1,686
    Las Vegas Nevada, US
    Full Name:
    Steve
    #117 TheOnlyest, Sep 5, 2008
    Well now, that was totally uncalled for... That is absolutely NOT TRUE Husker dude.
     
  18. TomPDX

    TomPDX Formula Junior

    Mar 28, 2008
    558
    Oregon
    Full Name:
    Tom
    #118 TomPDX, Sep 5, 2008
    ^ Collin knows I am joking ... I hope. Your reprutation is sound with us, Husker! Seriously, there is probably no one else that could pull this off - least of all me.
     
  19. elpadrino

    elpadrino Formula Junior

    Aug 29, 2005
    694
    Bogota NJ
    Full Name:
    Gabriel
    #119 elpadrino, Sep 5, 2008
    I dont even own a 348 and I want to see you finish this project...Hang in there man if anyone will see this through i know you will.
     
  20. Husker

    Husker F1 World Champ

    Dec 31, 2003
    11,792
    western hemisphere
    #120 Husker, Sep 8, 2008
    Within a few hours of my "ultimatum" email, I got this from the manufacturer:

    Collin,

    You have been great and I understand your frustration as it is very consistent with my own. I appreciate your patience, and I respect the deadline. This thing has taken entirely too long, as I think we under-estimated a few things. However, the metal has arrived and we are experimenting with a couple different methods of mounting this so it looks clean and straight. The metal as it arrived has a few waves, and possible will need some bracing which we did not anticipate. The solution in the future will be to change the gauge to make it stiffer. All of this aside, I will get you a part as quickly as I can and I am confident we can do this before your deadline.



    My sincere apologies,



    Jimmy


    MY COMMENTARY:

    It's the 8th today, so time is running out.
     
  21. TomPDX

    TomPDX Formula Junior

    Mar 28, 2008
    558
    Oregon
    Full Name:
    Tom
    #121 TomPDX, Sep 8, 2008
    Good job, Husker. By the way, as you know, my interest in your project is not merely academic, as some others in this post cheering you on! (...and I have lots of patience).
     
  22. TheOnlyest

    TheOnlyest Formula 3

    Sep 25, 2007
    1,686
    Las Vegas Nevada, US
    Full Name:
    Steve
    #122 TheOnlyest, Sep 18, 2008
    Collin? how goes it with that deadline thing?? It was the 12th right? Any word?
     
  23. AustinMartin

    AustinMartin F1 Veteran

    Mar 1, 2008
    5,445
    Los Angeles/Idaho
    #123 AustinMartin, Sep 18, 2008
    +1
     
  24. Husker

    Husker F1 World Champ

    Dec 31, 2003
    11,792
    western hemisphere
    #124 Husker, Sep 18, 2008
    Guys, I'm officially starting over on finding a manufacturer. The panel was supposed to be shipped to me this week, and now the guy isn't returning my emails. If I'm lucky, I will get back my prototype panel and taillights. I'm totally bummed. Cross your fingers that I can at least get this stuff back. I don't know what happened with this guy - he decided not to do it, got in over his head, wasn't a priority - whatever. I think he misled me big time and it's time to move on. I'll be honest my passion for this has been dampened because I invested so much time, only for some guy to string me along for 4 FREAKING MONTHS NOW. Sheez.
     
  25. albert328gts

    albert328gts Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,667
    California
    #125 albert328gts, Sep 18, 2008
    Last edited by a moderator: Sep 7, 2017
Page 5 of 7

Share This Page