Removing fog light on 348

Usually goes by a trade name "X-PEL"

http://www.xpel.com/products/headlight_protection.asp

 

Here's another alternative:

http://www.lamin-x.com/product-p/1-816.htm

I chose this particular film because it was available in 40 mil thickness -- thickest I could find. It's still plently flexible, and is all but invisible on the car.

- Eric

 

that's what I'm using

 

Guys, I'm happy to report that I'm all fixed up with a replacement fog light. I found a used, but practically new condition assembly. Thanks to Nolan at Ferrari of Houston for hooking me up. And thanks to everybody who offered information and advice.

-Alan

 

Hey guys, what holds these in from the back? When I bought my car from T-mobileguy the lights were shipped in the drivers compartment. I have since had it painted it, and would like to re-install them. I bought the correct screws from Daniel. There is barely enough room for a nut, let alone a washer. I'm thinking about glassing in a fastner. Can anybody supply a picture? The parts catalog shows nothing
Image Unavailable, Please Login

 

Thanks, i'm going to order a set from lamin as they are pre-cut. May even get the tinted one.