348 spider Ferrari script removal from deck lid | FerrariChat
Buy

348 spider Ferrari script removal from deck lid

Discussion in '348/355' started by elgin328, Dec 26, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. elgin328

    elgin328 Formula 3

    Apr 11, 2004
    1,034
    near Atlanta
    Full Name:
    Mark
    #1 elgin328, Dec 26, 2008
    I know you remove the two rubber plugs. There seems to be some type of push on nut that attaches to the studs. How do you get it off without loosing the nuts... & are there 2 studs or 3 on the script?

    tkanks, Mark
     
  2. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,620
    The Brickyard
    Full Name:
    The Bad Guy
    #2 ernie, Dec 27, 2008
    They just unscrew like a regular nut.
     
  3. elgin328

    elgin328 Formula 3

    Apr 11, 2004
    1,034
    near Atlanta
    Full Name:
    Mark
    #3 elgin328, Dec 27, 2008
    Last edited by a moderator: Sep 7, 2017
    Thanks Ernie... I know the nuts your talking about but these look like there plastic & they might push on.

    Whats the best whats to get them off you only have a dime sized hole to work in (I don't want to loose them)
    I tried needle nose pliers but I could not open them far enough.
    Do you know if there are 2 or 3 studs on the script.
    there is only 2 studs on the 308 & 328 script.

    if you loose them inside the hole it would be a bear to get out
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  4. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,469
    Winston Salem, NC
    #4 Ricambi America, Dec 27, 2008
    Last edited: Dec 27, 2008
    They are not nuts.

    Use a bit of a punch, and just PRESS the silver posts of the emblem skyward. The gray aluminum piece will break/bend apart, and allow the emblem to be removed. Use care.

    An alternate method is to use a tiny tin-snip and cut the grey aluminum piece until it basically releases the emblem. The emblem has smooth posts, not threaded. Those little clips are shown here:

    http://www.ricambiamerica.com/product_info.php?products_id=220592
     
  5. First Ferrari

    First Ferrari Formula Junior

    Jun 18, 2005
    523
    Mahtomedi,MN
    Full Name:
    Christopher Reeves
    #5 First Ferrari, Dec 27, 2008
    The spring clips also can be "removed" by a dental pick or like tool. In the past I used the pick to gently pry open the clip at the same time pushing the post of the emblem. You can not or should not reuse the clips.
     

Share This Page