Aftermarket Wheels for a 348 | FerrariChat

Aftermarket Wheels for a 348

Discussion in '348/355' started by albert328gts, Mar 6, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. albert328gts

    albert328gts Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,623
    California
    #1 albert328gts, Mar 6, 2009
    Last edited: Mar 6, 2009
    I have an opportunity to pick up a set of Speedline modular wheels for my 348, I was told they were off a 355. I have been told that The Front Wheels are 18"x8.5 ET-55mm and the Rears Wheels are 18"x10 ET-55mm. Am not sure if these measurement are accurate, my question is will they fit a 348 with the specs given. And lastly, I see many 348's on this board that have 360 Modular Wheels, I had tried those on my car at one time, no issue with the front, but the rear stuck out so much, I could not bare it. Does anyone know if those that have 360 Modular wheels had them shaved down?
     
  2. albert328gts

    albert328gts Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,623
    California
    #2 albert328gts, Mar 7, 2009
    Any help would be appreciated.
     
  3. BT

    BT F1 World Champ
    Lifetime Rossa

    Mar 21, 2005
    15,291
    FL / GA
    Full Name:
    Bill Tracy
    #3 BT, Mar 7, 2009
    I can't believe they would have a negative ET. That would be a very deep dish, especially on the rear wheels.
    Send a PM to DrT. He has challenge wheels on his 348, and I think he knows the offsets.
    BT
     
  4. albert328gts

    albert328gts Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,623
    California
    #4 albert328gts, Mar 7, 2009
    Thanks, I will do that.
     
  5. vvassallo

    vvassallo F1 Veteran
    Silver Subscribed

    Aug 4, 2006
    8,281
    Palos Verdes
    Full Name:
    Vince V
    #5 vvassallo, Mar 8, 2009
    darkaangel has 360 wheels on his Spider. Check with him. I think they look great, much better in person than in pictures.
     
  6. Saint Bastage

    Saint Bastage F1 Rookie

    Jun 1, 2007
    2,548
    Connecticut
    Full Name:
    Lane
    #6 Saint Bastage, Mar 8, 2009
    Last edited by a moderator: Sep 7, 2017
    I have a set of Highline wheels obtained from a 360. They do NOT clear the calipers in the front and needed a small (3/16) shim plate to work. Rears were fine.
    Image Unavailable, Please Login
     
  7. 355dreamer

    355dreamer F1 World Champ
    Owner Rossa Subscribed

    Apr 3, 2006
    10,469
    DC Metro
    Full Name:
    L.C.
    #7 355dreamer, Mar 8, 2009
    I have a set of stock 355 wheels which fit the 348 quite nicely and look the best IMHO. PM me if you are interested.
     
  8. elgin328

    elgin328 Formula 3

    Apr 11, 2004
    1,034
    near Atlanta
    Full Name:
    Mark
    #8 elgin328, Mar 8, 2009
    Last edited by a moderator: Sep 7, 2017
  9. Night life

    Night life F1 Veteran
    Silver Subscribed

    Dec 1, 2007
    7,123
    The city that rhymes with fun in Canada
    Full Name:
    Roberto
    #9 Night life, Mar 9, 2009
    Last edited by a moderator: Sep 7, 2017

Share This Page