430 to 355 paddle shifters | FerrariChat

430 to 355 paddle shifters

Discussion in '348/355' started by BLAMPEE, May 28, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    Joined:
    Jun 28, 2008
    Messages:
    15,424
    Location:
    Sunny Heavenly Beautiful Arizona
    Does anyone know if the Nickel-look OEM F430 paddle shifters will fit my 355?
     
    BLAMPEE, May 28, 2009
    #1
  2. ferraridriver

    ferraridriver F1 Rookie

    Joined:
    Aug 8, 2002
    Messages:
    4,152
    Location:
    Bay Area Calif.
    Full Name:
    Dave
    ferraridriver, May 28, 2009
    #2
  3. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    Joined:
    Jun 28, 2008
    Messages:
    15,424
    Location:
    Sunny Heavenly Beautiful Arizona
    BLAMPEE, May 28, 2009
    #3
  4. ferraridriver

    ferraridriver F1 Rookie

    Joined:
    Aug 8, 2002
    Messages:
    4,152
    Location:
    Bay Area Calif.
    Full Name:
    Dave
    I don't know for sure but I suspect so, call Daniel at Ricambi and ask him
     
    ferraridriver, May 28, 2009
    #4
  5. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    Joined:
    Jun 28, 2008
    Messages:
    15,424
    Location:
    Sunny Heavenly Beautiful Arizona
    Excellent. Thanks! :D
     
    BLAMPEE, May 28, 2009
    #5
  6. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,392
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    BP- That set for $100 in FerrariAds looks pretty good, no?

    Taz
    Terry Phillips
     
    tazandjan, May 28, 2009
    #6
  7. J. Salmon

    J. Salmon F1 Rookie Owner Rossa Subscribed

    Joined:
    Aug 27, 2005
    Messages:
    4,367
    Location:
    VA
    Previous owner of my car removed the paddles and bead blasted them. They have a nice gray finish, still say "up" and "down" as before. Same was done to the triangular trim pieces at the window corners, so it matches. Also matches the gray of the CS steering wheel.

    Just an idea...
     
    J. Salmon, May 28, 2009
    #7
  8. Exotica Motorsports

    Exotica Motorsports F1 Rookie

    Joined:
    Nov 1, 2003
    Messages:
    3,673
    Location:
    Washington
    Full Name:
    Jason Godsil
    Just FYI, the F430 paddles won't fit a 360 so I doubt they will fit a 355. The F430 paddles will bolt on a 360 but they are much more angled towards the steering wheel where the 360 paddles are shallower. This means that when you try to shift the F430 paddles will hit the steering wheel on a 360.
     
    Exotica Motorsports, May 28, 2009
    #8
  9. 285ferrari

    285ferrari Two Time F1 World Champ Sponsor

    Joined:
    Sep 11, 2004
    Messages:
    20,984
    Location:
    MD and NE
    Full Name:
    Robbie
    Just refinish the stock ones back to original...
     
    285ferrari, May 28, 2009
    #9
  10. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    Joined:
    Jun 28, 2008
    Messages:
    15,424
    Location:
    Sunny Heavenly Beautiful Arizona
    You already did that two months ago, Robbie. LOL.

    I just saw the nickel-look f430 ones on FerrariAds. ;)

    They are pretty!
     
    BLAMPEE, May 28, 2009
    #10
  11. Monteman

    Monteman Formula 3

    Joined:
    Feb 9, 2006
    Messages:
    2,351
    Location:
    Santa Barbara, CA
    Full Name:
    Monte
    I looked at doing the same thing but they won't fit. The 355 has a bolt spacing of 2.5" and the 430 is 2.25"
     
    Monteman, May 28, 2009
    #11
  12. 285ferrari

    285ferrari Two Time F1 World Champ Sponsor

    Joined:
    Sep 11, 2004
    Messages:
    20,984
    Location:
    MD and NE
    Full Name:
    Robbie
    Oh, that's right...:D
     
    285ferrari, May 28, 2009
    #12

Share This Page