Does anyone know where to get a set of air injection plugs?

They're made & enroute to me. UPS should deliver them to me next Wednesday. I'll add the crush washers (which also should be here Wed) & ship them to Ricambi. He should have them a week from Monday. Just send him $110.00/8 plug set + shipping & he'll get them to you for Christmas.

I've attached pictures:
The 1st picture shows of part of the mfg run, the 2nd picture shows the plug installed in a 2V head, and the 3rd picture shows how the end of the nose fits in an air injection port. The end of the nose is recessed about 0.020"[0.5 mm]. This should be enough recess to ensure that port to port & plug length variances won't make the nose protrude & interfere with exhaust flow, but it's not enough of a recess to cause whistling or other problems.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Sweet! I have listed them up for pre-orders.

http://www.ricambiamerica.com/product_info.php?products_id=263913

 

The injectors arrived in the local UPS depot this AM. Suspect they missed today's truck & they'll be on tomorrow's truck.

The washers are now the gating item.I just got an update on them. They're shipping to me late this Thursday, not today as originally promised. I should receive them Monday, 22nd & will get the injectors w/washers out to Ricambi the next AM.

 

Now in stock!

http://www.ricambiamerica.com/product_info.php?products_id=263913

 

These plugs fit the 2V and early QV 308s with M14 x 1.5 threads (same thread as the older spark plugs). See post # 26 of this thread for pictures.

You can now order them directly from Unobtainium Supply:

Price is $110 + S&I for a set of 8 plugs.

To order, click on my name by any of my posts & select [Send eMAIL to Verell], or just add them to an order from Ricambi(aka Jack Russell Racing).

 

There sure is allot of conversation on plugging the AIR ports. I simply cut them off to the proper length and ran a 1/4-20 tap into the top(after cutting the threads off) and closed it with a 1/4-20 X 3/8 set screw W/locktite and then pressed a 1/4" ball bearing into the bottom end and then swedged the tip just to be sure. I'd rather spend the 100bucks on gaskets. old guy in the UP

 

Severel people have PMed me recently about the 2V Air Injection Plugs. Here is a picture of the Air Injection plugs I've been shipping & supplying to Ricambi since 2009. 2nd picture shows an installed plug, & 3rd picture shows the nose almost completely filling the hole in the manifold.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

^^^^^ The Hot Setup.....

That's the way to go, but I have used lostbowl's 'ballbearing in the fitting trick' also...just as a temporary fix.