Replacing 328 ignition cables | FerrariChat
Buy

Replacing 328 ignition cables

Discussion in '308/328' started by maurice70, Jun 12, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. maurice70

    maurice70 F1 Rookie

    Jan 25, 2004
    4,334
    Sydney
    Full Name:
    maurice T
    #1 maurice70, Jun 12, 2009
    Are theses cables able to be replaced with any type of cable or do they require OEM.Does the red boot off the original cables come off?Without looking at them closely it appears that the cables hav a red sheath over them.I would like to know if I can remove this sheath and bot and replace them with generic cables.Thanks
     
  2. RGigante

    RGigante F1 Rookie
    Owner Project Master

    Nov 1, 2006
    2,874
    Portugal
    #2 RGigante, Jun 15, 2009
    Maurice,

    I've replaced mine at home with Magnecor Electrosports wire. They've also supplied the outer red silicone sheath. I've kept the spark plug hole covers, they were in good shape, but replaced the inner connectors, too.

    I'm very happy with the result!
     
  3. maurice70

    maurice70 F1 Rookie

    Jan 25, 2004
    4,334
    Sydney
    Full Name:
    maurice T
    #3 maurice70, Jun 15, 2009
    Thanks for the reply,so were the spark plug rubber boots easy to remove from the original leads?Do they just come out?I replaced the ones on the GT4 with ease but the boots are separate to the leads and can be bought separately as well.
     

Share This Page