Single or Dual clutch ?? 348 TS 1991 | FerrariChat

Single or Dual clutch ?? 348 TS 1991

Discussion in '348/355' started by captglen, Jul 30, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. captglen

    captglen Formula 3
    Silver Subscribed

    Nov 25, 2007
    1,790
    West Palm Beach, Fl
    Full Name:
    Glenn L.
    I want to know if VIN 090402 is a sigle or dual clutch
    Does anyone know this ??
    Thanks
    Glenn
     
  2. fxdwgs

    fxdwgs Formula 3

    Aug 22, 2006
    1,016
    Sjobo, Sweden
    Full Name:
    Bengt
    Guess you have to take it apart.......quite easy to do....

    Rgds,

    //B//
     
  3. PassionIsFerrari

    PassionIsFerrari Formula 3

    Aug 15, 2004
    2,454
    I thought they didnt start the single disc clutches till 1993...
     
  4. FandLcars

    FandLcars F1 Rookie

    Aug 6, 2006
    3,057
    Tempe, Az
    Full Name:
    Rick Schumm
    #4 FandLcars, Jul 31, 2009
    Last edited: Jul 31, 2009
    Ricambi's website has parts diagrams for all models. Here's a link to their dwg. showing parts for both the single and dual disk clutches thru 1992. There's also a different dwg. for later 348s. Note that in the parts listings, the last dual disk clutch is for the vehicle with Engine No. 24980 (not VIN). The single disk started with Engine No. 24981. So you'll have to find engine number to verify what was original from the factory. Obviously, this is no guarantee what's actually on earlier cars, since many have been converted from dual to single disk by owners.

    http://www.ricambiamerica.com/parts_catalogs.php?M=FE&P=&V=diag&I=3083
     
  5. captglen

    captglen Formula 3
    Silver Subscribed

    Nov 25, 2007
    1,790
    West Palm Beach, Fl
    Full Name:
    Glenn L.
    Thanks for the answer, I will have Tim Stanford check it out
    Regards
    Glenmn
     

Share This Page