08+ TPMS reset? | FerrariChat

08+ TPMS reset?

Discussion in '360/430' started by Paul N, Jul 16, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Paul N

    Paul N Karting

    Aug 8, 2006
    62
    Orange County, CA
    Full Name:
    Paul
    So Ferrari went with a newer TPMS setup on 08+ 430s. Without the little button under the dash, how do you reset it?

    Thanks
     
  2. FerrariJones

    FerrariJones Karting

    Nov 1, 2004
    57
    Seattle
    On the '08 and newer it should be automatically calibrating every fifteen minutes or so while you drive. No need for the button, it does it itself. Might mention it in the owners manual.
     
  3. JamesS

    JamesS Rookie

    Oct 4, 2008
    25
    There's no need to reset the newer system on the F430. Why do you want to do this?

    The system is calibrated by the dealer for the type of tyres on the vehicle.

    The system automatically detects when wheels are swapped or new wheels are fitted and adjusts itself accordingly.
     
  4. Paul N

    Paul N Karting

    Aug 8, 2006
    62
    Orange County, CA
    Full Name:
    Paul
    Aftermarket wheels with new sensors that don't register.
     
  5. JamesS

    JamesS Rookie

    Oct 4, 2008
    25
    If the sensors are the correct type (Gen2, not the Gen1 or Gen1.5) then the system will automatically detect them and start monitoring them.

    Do any of the sensors register with the vehicle (i.e. any of the pressures appear on the dash)?

    If you put your old wheels right next to the car (parallel to your new wheels, with the valves/sensors at the 12 o'clock position) and switch on your ignition does the system recognise your old wheels?

    I would say the most likely cause is the wrong sensor type being fitted.
     

Share This Page