New 360/F430 F1 Tool- Actuator Lever Alignment (aka "How a Pro Shop Saves $1000") | FerrariChat

New 360/F430 F1 Tool- Actuator Lever Alignment (aka "How a Pro Shop Saves $1000")

Discussion in '360/430' started by Ricambi America, Sep 17, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,248
    Winston Salem, NC
    #1 Ricambi America, Sep 17, 2009
    Last edited by a moderator: Sep 7, 2017
    In the past, we sold a very few 95973271 tools to professional shops around the world that desperately needed this item. But, at $1300 a pop, its too darn expensive and it takes several F1 jobs to get a return on this investment.

    Well, once again the wizards at Hill Engineering have released their beastly (10+ pounds!) version of the 95973271 tool, and priced it within the reach of every independent shop working on these cars! The Hill Engineering version is dimensionally identical to the Ferrari one, but much nicer to own. This tool (like the Hill Engineering gearbox bushing extractor) has a home in every shop's tool bin. It'll work on 360, Stradale, F430, and Enzo actuators. And yes, Jim -- it'll should even work on P4/5!

    Several of these arrived today at Ricambi America, and they're available for immediate shipment. We have them available on our site here, at only $290: Hill Engineering F1 Actuator Alignment Tool

    (I've included some scans of the WSM if you're curious how the tool is used :) )
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. andy308

    andy308 Formula 3

    Jan 16, 2005
    2,020
    Sarasota, FL
    Full Name:
    Andy
    #2 andy308, Sep 17, 2009
    Very cool!
     

Share This Page