Are the wheel bolt patterns and sizes all standard? | FerrariChat

Are the wheel bolt patterns and sizes all standard?

Discussion in 'Northwest' started by Jonny Law, Dec 3, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jonny Law

    Jonny Law F1 Rookie
    Silver Subscribed

    May 6, 2008
    3,173
    Over yonder.
    Full Name:
    IT Guy
    #1 Jonny Law, Dec 3, 2009
    Just wondering if wheels from one model will fit on other models? Granted the wheels from the new models are a lot wider then the older models.
     
  2. dinogt4guy

    dinogt4guy F1 Rookie

    Oct 31, 2004
    3,409
    Hewitt, Tx.
    Full Name:
    Kurtis Fordice
    #2 dinogt4guy, Dec 3, 2009
    Not sure on the pattern but I have seen alot of swaped out wheels on various cars. The offsets are what vary considerabley, so the use of spacers is often a topic of discusion.

    Cheers!
     
  3. 2000 456M

    2000 456M F1 World Champ

    Sep 29, 2007
    12,600
    Portland, OR
    Full Name:
    Allan
    #3 2000 456M, Dec 3, 2009
    Except for the latest models (beginning with the 612) the bolt circle has been 5 x 108. The the 360 and 430 wheels have greater positive offset than the 456/550/575s, so using them on the V-12s require spacers, especially in the rear. The v-8 wheels also may be narrower at the front than the 8.5 in. width of the V12s' rims.
     

Share This Page