308 dust shield,front hub | FerrariChat

308 dust shield,front hub

Discussion in '308/328' started by CaptOharry, Feb 21, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. CaptOharry

    CaptOharry Formula Junior

    Jan 4, 2009
    755
    Green Cove Spgs FL
    Full Name:
    Harry Welch
    #1 CaptOharry, Feb 21, 2010
    Is there anyone who knows who to contact for a dust shield for the front hub,I replaced the bearings,Seals on both hubs.The big problem is one is out of round,I tried to repair it but hit a brick wall.T-rutlands was a Zero , Italian Car Parts a Zero.If anyone knows where I can buy one please help.I did take the good one to Napa,O'riley's,Discount Auto Still batting Zero,Problem is it's the only part holding up the reassembly.Thanks for any Info.
     
  2. pad

    pad Formula 3

    Sep 30, 2004
    1,418
    Tequesta, FL
    Full Name:
    Paul Delatush
    #2 pad, Feb 21, 2010
    I went through the same dance last year. Did you try Ricambi?
     
  3. ramosel

    ramosel Formula 3

    Sep 11, 2004
    1,237
    Meadow Vista, CA
    Full Name:
    R Moseley
    #3 ramosel, Feb 21, 2010
    If used is OK, FerrParts has a QV they are breaking. You didn't specify year or model, but they may all be the same.

    Rick
     
  4. 2dinos

    2dinos F1 Rookie

    Jan 13, 2007
    2,779
    #4 2dinos, Feb 21, 2010
    post a picture
     
  5. Nurburgringer

    Nurburgringer F1 World Champ

    Jan 3, 2009
    11,032
    Texass
    #5 Nurburgringer, Feb 21, 2010
    I left them off my '85 when the front brakes were rebuilt last summer.
    Will check to see if they're still around, but think I may have tossed them..
     
  6. CaptOharry

    CaptOharry Formula Junior

    Jan 4, 2009
    755
    Green Cove Spgs FL
    Full Name:
    Harry Welch
    #6 CaptOharry, Feb 22, 2010
    Thanks for the info,I just found a close replacement at a Trailer Repair Store.But Hey! Nurburgringer if you find them I'll take them,You can E-mail me at [email protected]
     

Share This Page