Here we go. What to do when you're bored. | FerrariChat

Here we go. What to do when you're bored.

Discussion in '348/355' started by 2mmuch, Apr 29, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #1 2mmuch, Apr 29, 2010
    Last edited by a moderator: Sep 7, 2017
    I was sitting around borded, and when I get bored I kind a do something stupid. Well I was looking at my 348 and thought wouldn’t it be cool to have a glass bonnet, and away I went. So I found a used engine lid $200 (it wall all damaged, but didn't matter I was going to cut it up anyway) and started down the road of designing what I wanted it to look like I seen the typical square glass but once again I needed it to be different. So I shaped it. I CNC cut a frame and started to graph it into the lid. I sent the same pattern to a custom glass shop who used a water jet to cut the glass and then sent it out to be tempered, should be back next weekend only $70 bucks Canadian, that gives me time to have the frame all welded together and painted. Once I get the glass back I will bring it to a glass installation place and get them to install it, can’t wait. I will install the original grille around it add cut it to the same shape.

    I really have to stop doing things like this. Oh well if I don’t like it I can always go back to my original bonnet. What will I do for the rest of the summer.

    Oh Yhea, DRIVEEEEE.
    Image Unavailable, Please Login
     
  2. CarreraScott

    CarreraScott Formula Junior

    Jan 30, 2004
    592
    Charlottesville, VA
    Cool, can't wait to see the progress!
     
  3. Jedi

    Jedi Moderator
    Moderator Lifetime Rossa Owner

    Mar 18, 2008
    32,335
    Seattle Area
    Full Name:
    Dave
    Wow!! It's from the FUTURE - 5/30/10 !!!! That is very cool - like Delorean cool...


    :D :D

    Jedi
     
  4. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    thanks

    I just notice my camera date was out to lunch. That is really going to mess up some of my friends who I just sent pictures to.
     
  5. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,234
    Mount Isa, Australia
    Full Name:
    Pap
    Very cool Luigi! :D:D
     
  6. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,620
    The Brickyard
    Full Name:
    The Bad Guy
    I LIKE!

    Please keep us updated on the progress. With plenty of pics too.
     
  7. Saint Bastage

    Saint Bastage F1 Rookie

    Jun 1, 2007
    2,548
    Connecticut
    Full Name:
    Lane
    #7 Saint Bastage, Apr 29, 2010
    Last edited by a moderator: Sep 7, 2017
  8. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,789
    Ontario, Canada
    Full Name:
    Mike
    Looking forward to seeing the finished product.

    You mentioned Canadian, where abouts in Canada are you?
     
  9. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    Windsor, Ontario

    I think it going to tune out cool. I couldn't wait to take the picture once I put the frame section on the back of the car, it fit perfect.
     
  10. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,789
    Ontario, Canada
    Full Name:
    Mike
    Excellent, you are only an hour and a half west of me. If you are ever in the London area give me a shout.
     
  11. Rodztoy

    Rodztoy Rookie

    Jul 8, 2008
    33
    Edmonton, Canada
    Full Name:
    Rod
    Can't wait to see it!
     
  12. rbellezza

    rbellezza F1 Rookie

    Jun 18, 2008
    2,793
    Henderson, NV
    Full Name:
    Roberto Bellezza
  13. Night life

    Night life F1 Veteran
    Silver Subscribed

    Dec 1, 2007
    7,312
    The city that rhymes with fun in Canada
    Full Name:
    Roberto
    #13 Night life, Apr 30, 2010
    Last edited: Apr 30, 2010
    Wow my fellow Canadian Paisano very very cool, I like it, I like it a lot if it turns out would you consider making others?

    Always disliked the lid and the back end of the 348, kind of boring, the front and sides look great then it's like they changed designer for the rear end lol. I was in the proses of making a rear wing for my spider when catastrophe struck with my engine(but thats a whole other topic:)). With your lid and my wing the 348 will look stunning :D.
     
  14. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    Will I make another? I'll see. I do have the tools now to do it again. Once I'm done I'll see if there is anything I would change. I do have my original one still, may be do that one and sell it where you would trade yours back to me for an exchange. Something for me to think about.
     
  15. MufflerMan

    MufflerMan Formula 3

    Jun 12, 2005
    1,564
    Sacramento Ca
    Full Name:
    Colby Sandman
    Very nice. I assume you work with CNC's for a living? I wish I had one in my garage!
     
  16. AWESOME

    AWESOME Karting

    Jan 29, 2009
    189
    Burlington, VT USA
    Full Name:
    Matt L.
    #16 AWESOME, Apr 30, 2010
    Last edited: Apr 30, 2010
    very cool, except now that your motor is going to be exposed, you are gonna need to do some dress up!

    some ideas: Get you intake manny powder coated a nice Ferrari Red, and the those two curved intake tubed, get those replaced with carbon fiber pieces. then maybe look at what you can paint, replace with carbon, or hide (as in wire tuck, etc.)


    Very awesome!!!
     
  17. TopElement

    TopElement Formula 3

    May 14, 2005
    1,540
    OC & Vegas
    Full Name:
    A Montoya
    Interesting project, and props for carrying it out yourself.
    But what beautful object are you trying to see through the window?
     
  18. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    The Ferrari engine. Not done yet but I have a couple of ideas what I want to do back there that should impress.

    Thanks
     
  19. ferrari 512 tr

    ferrari 512 tr F1 Rookie

    Nov 16, 2008
    4,180
    Australia
    Full Name:
    Paolo
    very good brother
     
  20. Night life

    Night life F1 Veteran
    Silver Subscribed

    Dec 1, 2007
    7,312
    The city that rhymes with fun in Canada
    Full Name:
    Roberto
    Deal I would gladly do that. Any more pics yet?

    He makes a good point, I just re did my engine, I changed the color of the airbox and matched it to the plenum with red accents also blacked out the headers and Hyperflows, I will post pics when all is completed should be next week I hope.
     
  21. Andy348

    Andy348 Formula 3

    Nov 4, 2007
    1,254
    Canada
    Full Name:
    Andy
    Interesting idea.

    Good luck! Hopefully it'll turn out nice.
     
  22. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #22 2mmuch, May 2, 2010
    Last edited by a moderator: Sep 7, 2017
    Well, got the deck lid back from sand blast and it looks great. Finished cutting the grille to fit and looks good so far, just started cutting the black mesh that goes under. Sending it to the body shop tomorrow for them to do there magic and make it look perfect. Glass should be here by Friday, can't wait.
    Image Unavailable, Please Login
     
  23. Night life

    Night life F1 Veteran
    Silver Subscribed

    Dec 1, 2007
    7,312
    The city that rhymes with fun in Canada
    Full Name:
    Roberto
    Lookin good
     
  24. rbellezza

    rbellezza F1 Rookie

    Jun 18, 2008
    2,793
    Henderson, NV
    Full Name:
    Roberto Bellezza
    I really like to see how it looks when is completely done and mounted on the car !!! Great job !!!
     
  25. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #25 2mmuch, May 22, 2010
    Last edited by a moderator: Sep 7, 2017

Share This Page