number plates in Victoria?

Qld has a plexi plate to suit the European rounded front nose'd cars. If you already have a private plate it costs I think around $430 to change over too it!

 

some dealers were sending out new Bentley's with plate stickers which the buyers paid extra for only to receive a fine for using them !!

I think Q was one of those done for this

 

I contacted Qld Transport about the plexi plate, I may still yet get it, the front plate sticks out to far!
Image Unavailable, Please Login

 

............... funny you should say that. When my parents were choosing names for me the P and D were foregone conclusions. My dad DID work for the Public Works Department and I got a Wayne for a middle name so dad could say any shovels etc found at home with PWD on them belonged to me funny guy hey !

 

Glue it on the bonnet.

In fact, STICK IT UP YOURSELF!!

 

offset it to the left or right of the radiator

 

gee you're harsh tonight Horsey

 

Why worry about it, it's not registered, let alone roadworthy!!!

 

Ask someone that gives a rats!!!!

 

Big hole, right at the bottom middle. Perfect!

 

What's wrong with on the bumper immediately above the air intake. You've got plenty of room and it is the logical place.

 

Slightly OT and just asking: has there been any consensus/you decided on front plate location for the 458?

 

Plenty of ideas but no consensus. First SA car here next week so I'll take a closer look.

 

I agree, thats what I tried to show in Post #14. And using PSA means you don't have to drill holes.

 

Did you manage to get a slimline plate for the front? They are only 100mm in height as oppossed to the standard plates which are 130mm high.

 

You are being fussy. Many (most?) cars on the road have a front plate that isn't flush with the mounting location.

Tape it on and take a pic so we can advise you further.