how do I get the tach and speedo out / | FerrariChat
Buy

how do I get the tach and speedo out /

Discussion in '308/328' started by [email protected], Aug 9, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. andy2175m4@yahoo.com

    [email protected] Formula Junior

    Dec 7, 2008
    473
    Los Angeles, CA
    Full Name:
    Andy Rein
    #1 [email protected], Aug 9, 2010
    I have some instrument cluster issues I need to work on, and I need to get the speedo and tach out to address, how do I get these out wihtout removing the entire dashboard ?

    Is there a trick to getting the instruments out to service them ?? (and wiring behind it)

    thanks

    Andy
     
  2. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,406
    Houston, Texas
    Full Name:
    Bubba
    #2 BigTex, Aug 9, 2010
    You pull the four trouble lights out and unscrew the metal panel, removal from there is pretty obvious....might want to disconnect battery to be safe....
     
  3. furnacerepair

    furnacerepair Formula Junior

    Feb 9, 2009
    744
    Wisconsin
    Full Name:
    Martini
    #3 furnacerepair, Aug 9, 2010
    If you take your steering wheel off it gives you more room to work.
     
  4. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,406
    Houston, Texas
    Full Name:
    Bubba
    #4 BigTex, Aug 9, 2010
    Optional ....good point tho......protect the column from the plate edges, for sure!!!
     
  5. viper_driver

    viper_driver Formula Junior

    Jan 1, 2009
    978
    Vegas
    Full Name:
    Jason
    #5 viper_driver, Aug 9, 2010
    it's easy to remove the gauges, but you have to take out all of them at the same time. take out the little lights, remove the screws behind them. then the whole gauge cluster comes out. you'll see that the gauges are attached to the flat metal piece from behind and each has a wiring plug to make removing them easy.
     
  6. MBFerrari

    MBFerrari F1 Veteran

    Jul 2, 2008
    6,057
    NoVA
    Full Name:
    Matt B
    #6 MBFerrari, Aug 9, 2010
    Hey Tex (or anyone), can you just pull the trouble lights out? I am going to replace mine with a stock set but just wanted to know if they are pull out and push the new ones back in?

    Thanks,
    MB
     
  7. viper_driver

    viper_driver Formula Junior

    Jan 1, 2009
    978
    Vegas
    Full Name:
    Jason
    #7 viper_driver, Aug 10, 2010
    yep, just pull them out. I've heard you can use fishing line to wrap around them if they're hard to get out. Mine were easy, just a slight pull and they came right out.
     
  8. Darolls

    Darolls F1 Veteran
    BANNED

    Jul 2, 2003
    7,782
    Full Name:
    Sparky
    #8 Darolls, Aug 10, 2010
    Fishing line or dental floss works.
     
  9. GrigioGuy

    GrigioGuy Splenda Daddy
    Lifetime Rossa Owner

    Nov 26, 2001
    33,391
    E ' ' '/ F
    Full Name:
    Enzo Gorlomi
    #9 GrigioGuy, Aug 10, 2010
  10. furnacerepair

    furnacerepair Formula Junior

    Feb 9, 2009
    744
    Wisconsin
    Full Name:
    Martini
    #10 furnacerepair, Aug 10, 2010
    Last edited by a moderator: Sep 7, 2017
    When you take out the lights, remember where they were. LOL. Mine are not in the correct spots. Two of them got reversed. Maybe I'll fix that sometime.
    Image Unavailable, Please Login
     
  11. ace_pilot

    ace_pilot Formula Junior

    Sep 6, 2007
    921
    Long Island, NY
    Full Name:
    George
    #11 ace_pilot, Aug 10, 2010
  12. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,406
    Houston, Texas
    Full Name:
    Bubba
    #12 BigTex, Aug 10, 2010
    That was a good deal.....
     
  13. 4right

    4right F1 Rookie
    Rossa Subscribed

    Sep 14, 2008
    2,968
    US/Japan/Singapore/Canada/US
    #13 4right, Aug 10, 2010
    I broke an allen wrench off inside one of the screws on the steering wheel when I replaced the instrumentaion cover a while back.

    Be careful!
     
  14. MBFerrari

    MBFerrari F1 Veteran

    Jul 2, 2008
    6,057
    NoVA
    Full Name:
    Matt B
    #14 MBFerrari, Aug 10, 2010
    Thanks Jason and Sparky...back to your regularly scheduled thread...
     
  15. Darolls

    Darolls F1 Veteran
    BANNED

    Jul 2, 2003
    7,782
    Full Name:
    Sparky
    #15 Darolls, Aug 11, 2010
    That's because you didn't use a 'hardened' 3mm Allen wrench. For some reason the factory puts 'Lock-tight' on the screws. If you don't use a case hardened wrench, the wrench will strip before the screw does.
     
  16. 4right

    4right F1 Rookie
    Rossa Subscribed

    Sep 14, 2008
    2,968
    US/Japan/Singapore/Canada/US
    #16 4right, Aug 11, 2010
    It didnt strip, the allen wrench broke off inside of the screw. It was one of those allen wrenches that has a ball end hex. I had to drill out the screw, it was quit the ordeal.

    I had a whole set of them that got thrown in the trash.

    Leason learned.
     
  17. furnacerepair

    furnacerepair Formula Junior

    Feb 9, 2009
    744
    Wisconsin
    Full Name:
    Martini
    #17 furnacerepair, Aug 11, 2010
    So true. The screws are very tight indeed. Hard to get out the first time for sure.
     
  18. Paul_308

    Paul_308 Formula 3

    Mar 12, 2004
    2,345
    #18 Paul_308, Aug 11, 2010
    Last edited by a moderator: Sep 7, 2017
    Breaking one screw requiring drilling and retapping can cost hours.

    For steering wheel screw removal $8 is a small price for the absolute best tool - Assenmacher 1/4" socket 3mm allen -
    http://www.toolsource.com/drive-allen-socket-h85013-p-103657.html

    or the set -
    http://www.toolsource.com/socket-torx-driver-40pc-p-102144.html

    .
    Image Unavailable, Please Login
     

Share This Page