Does somebody have a good adress for rear spacers for the 348? Also the technical specs? Is it 5x 108? and the centre hole diameter? How thick? I would like to make this upgrade on my 348. Thanks in advance!!
Had these on my 348 and there a great bit of kit 25mm spacer link below http://www.hillengineering.co.uk/catalog/ws025-p-232.html?osCsid=d0128c0b2aae5dc1e19f3858f90d7155
Type 1 spacers have wheel bolts clamp it all together. Type 2 spacers come with smaller bolts that bolt spacer to hub. Then wheel bolts bolt onto spacer. Id go with the type 2. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Thank you all for the great answers! Very clear about the type I and II!! I've raced with Alfa Romeo's and type II spacers but with 300hp on the rear wheels is it safe? I had bolts coming out my spacers for the wheels, but I understand that the original wheel bolts go into the aluminium spacers at Ferrarri spacers??
Which car has 300HP at the rear wheels? My 348 has 254HP at the rear wheels after I fitted an XOST, exhaust. The wheel bolts go into inserts, pressed into the aluminium wheel spacers. Safe as houses. I had one come loose after I fitted them, but the wheel bolts were shagged. New wheel spacers and old/****ed wheel bolts dont mix. Check this thread out. http://www.ferrarichat.com/forum/showthread.php?t=159667&page=11 But I have since fitted the new spacers and wheel bolts from Hill Engineering and have done a few thousand km's on them and they are still as tight as ever. Image Unavailable, Please Login
