F40 (Euro) problem | FerrariChat
Buy

F40 (Euro) problem

Discussion in 'Technical Q&A' started by Birel, Oct 6, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Birel

    Birel Formula 3

    Sep 12, 2005
    1,957
    Brisbane
    Full Name:
    Andrew Turner
    #1 Birel, Oct 6, 2010
    Can someone please help with some plumbing problems with the waste gate boost control valve ( part # 135965) that adjusts pressures from the inlet manifold to the Waste Gate?

    The plastic circular valve located on the right hand side of the engine bay has 3 ports marked R ,C and W. Which hose lines go to which ports? I believe one is not used and the other 2 go to the Waste Gate and Inlet manifold.

    Any contribution welcome !!
     
  2. Chiicago

    Chiicago Rookie

    Oct 6, 2010
    14
    #2 Chiicago, Oct 6, 2010
    Last edited by a moderator: Sep 7, 2017
  3. Birel

    Birel Formula 3

    Sep 12, 2005
    1,957
    Brisbane
    Full Name:
    Andrew Turner
    #3 Birel, Oct 6, 2010
    Wow, that was quick ! Will check and confirm.

    Many thanks,

    Andrew
     
  4. Chiicago

    Chiicago Rookie

    Oct 6, 2010
    14
    #4 Chiicago, Oct 6, 2010
    No problem, are you having power issues?
     
  5. Chiicago

    Chiicago Rookie

    Oct 6, 2010
    14
    #5 Chiicago, Oct 7, 2010
    Did it work out?
     
  6. GatorFL

    GatorFL Moderator
    Moderator Owner

    Nov 18, 2005
    17,086
    Wellington, FL
    Full Name:
    Duane
    #6 GatorFL, Oct 11, 2010
    Last edited: Oct 11, 2010
    That wastegate valve seems like a total mindgame.....hope you get it figured out!
     
  7. TimF40

    TimF40 Formula 3

    Nov 3, 2003
    1,035
    Seattle/Bay Area/NYC
    Full Name:
    Tim
    #7 TimF40, Oct 11, 2010
    The above picture was from my F40 amal valve thread a while back.

    http://www.ferrarichat.com/forum/showthread.php?t=267771

    Make sure you have a good valve before hooking it back up. If it leaks, it'll bleed off boost by itself.

    The thread might be worth a read.

    Good luck!

    Tim
     

Share This Page